Overview

TP−789Rxr is a high−performance, extended−reach HDBaseT receiver for 4K60Hz (4:2:0) HDMI, Ethernet, RS−232 and IR signals and 2−way powering over twisted pair. It extends video signals to up to 100m (330ft) over Kramer copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions. This receiver either provides power over the copper extension cable to a POE (Power over Ethernet) acceptor device such as a PoE wall−plate, or accepts PoE through the extension cable from a PoE provider remote device, as auto−sensed by the receiver.

• High Performance Standard Extender — Professional HDBaseT extender for providing extended–reach signals and powering over twisted–pair copper infrastructures. TP–789Rxr is a standard extender that can be connected to any market–available HDBaseT–compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• Bidirectional PoE (Power over Ethernet) — Auto–senses the extension line PoE status and either provides power to a remote POE acceptor such as a PoE wall–plate, or accepts power from a remote PoE provider such as a PoE matrix.
• HDMI Signal Extension — Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0. EDID and CEC signals are passed through from the source to the display.
• I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi–channel Audio Extension — Up to 32 channels of digital stereo uncompressed signals for supporting studio–grade surround sound.
• Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
• Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost–Effective Maintenance — Status LED indicators for HDMI and HDBT ports and PoE feed status facilitate easy local maintenance and troubleshooting. Local firmware upgrade via RS–232 connection ensures lasting, field–proven deployment.
• Easy Installation — Single cable connectivity for both HDBaseT signals and power. Compact DigiTOOLS® fan–less enclosure for dropped–ceiling mounting, or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Applications

• Long–distance AV signal extension for multi–room, large dividable auditoriums and lecture hall connectivity
• AV extension in conference rooms, boardrooms, control rooms, hotels and large church facilities

Specifications

Inputs

• 1 HDBT: On a female RJ–45 connector

Outputs

• 1 HDMI: On a female HDMI connector

Ports

• 1 IR: On a 3.5mm mini jack for IR link extension
• 1 RS−232: On a 3–pin terminal block connector for serial link extension and device firmware upgrade
• 1 100BaseT Ethernet: On an RJ–45 female connector for LAN extension

Extension Line

• Up to 100m (330ft): At 4K@60Hz (4:2:0)
• Up to 130m (430ft): At full HD (1080p @60Hz 36bpp)
• Up to 180m (590ft): At HDBaseT ultra mode and full HD (1080p @60Hz 24bpp)
• Note: When using Kramer HDBaseT cables
• Standards Compliance: HDBaseT 1.0

Video

• Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
• Max. Resolution: 4K@60Hz (4:2:0) 24bpp resolution
• HDMI Support: Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0

Extended Ethernet

• Up to 100Mbps extended line rate bandwidth

Extended RS-232

• 300 to 115200 baud rate

Extended Bidirectional IR

• 20kHz to 100kHz frequency

User Interface

• Indicators: IN, OUT, LINK, PoE FEEDER and ON LED indicators
• Controls: DIP–switches

Power

• Source: 48V DC, 1.36A
• PoE: Acceptor and Provider
• Consumption: 370mA
• Consumption with PoE: 13Watt

Enclosure

• Size: DigiTOOLS®
• Material: Aluminum
• Cooling: Convection ventilation

Environmental Conditions

• Operating Temperature: 0° to 40°C (32° to 104°F)
• Storage Temperature: –40° to +70°C (–40° to 158°F)
• Humidity: 10% to 90%, RHL non–condensing

STANDARDS COMPLIANCE

• Safety : CE
• Environmental : RoHs, WEEE

Accessories

• Included: Power adapter, bracket set

Product Dimensions

• 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H

Product Weight

• 0.3kg (0.6lbs) approx.

Shipping Dimensions

• 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H

Shipping Weight

• 0.7kg (1.5lbs) approx.