Overview

676R is a high−performance HDMI fiber receiver for ultra−reach extension of 4K@60Hz (4:4:4) HDMI signals. 676R receives the transmitted optical signal from a compatible transmitter and converts it to an HDMI and RS−232 signals. 676R includes a multi−mode SFP+ transceiver, but can be used with any Kramer certified SFP+ transceiver, such as a single−mode SFP+ transceiver.

Features

• High Performance Standard Fiber Extender — HDMI fiber receiver for providing ultra–reach signals over either multi–mode or single–mode optical fiber infrastructures, using Kramer pluggable OSP SFP+ units (multi–mode SFP+ included). Near–zero latency video chroma sub–sampling conversion technology, is employed to auto–adapt above 10G HDMI signals to 10G optical link signal data–rate.
  Note: To ensure specified performance, support, and warranty of this product, use only Kramer's certified hi–performance OSP SFP+ pluggable optical units.
• Multi–drop Signal Distribution — Use optical splitters to extend the input signals from a single transmitter to multiple receivers, for displaying the same content on multiple display devices using optical splitting only, with no need for AV distribution amplifiers.
• HDMI Signal Extension — HDCP 2.2 compliant and supports up to 18G (6G per channel) data rate, LPCM 7.1, Dolby True HD, and DTS–HD as specified in HDMI 2.0.
• Power Saving — With CEC ON/OFF function, shut down a display device automatically when not in use, and auto power it ON upon presentation start.
• I–EDIDPro™ Kramer Intelligent EDID Processing™ — Intelligent EDID handling, processing and pass–through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Bidirectional RS–232 Extension — Serial interface data flows in both directions, to enable data transmission and control of devices.
• Cost–Effective Maintenance — Status LED indicators for power, source, sink and fiber link connections detection facilitate easy local troubleshooting.
• Easy Installation — DigiTOOLS® rack mountable fan–less enclosure enables side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Applications

• Highly secured and ultra–long extension of controllable AV signals for: governmental, medical, and rental and staging applications.
• Point–to–multipoint optical distribution of controllable AV signals over large spaces.
  Multipoint–to–multipoint optical distribution of controllable AV signals over large spaces using Kramer modular matrices.
• Ultra–long signals extension for multi–room and inter–building connectivity.

Specifications

Inputs

• Fiber Optic: On LC connector(s)

Outputs

• HDMI: On a female HDMI connector

Ports

• RS-232: On a 3–pin terminal block connector
• USB: On a female micro USB connector for firmware upgrade

Video

• Max Bandwidth: 18Gbps
• Max Resolution: 4096x2160@60Hz 4K@60 (4:4:4)
• Compliance: HDMI 2.0 and HDCP 2.2

Extension Line

• Optical Fiber: Multi–mode (MM) or single–mode (SM)
• Optical Module: Kramer 10Gbps SFP+ IEEE 802.3ae compliant modules (MM is included)

Multi-mode Line

• Compliance: G.651.1 OFNR fiber
• Max Reach over OM3 MM Fiber: 3km (1.8 miles)

Single-mode Line

• Compliance: G.652D OFNR fiber
• Max Reach over OS1 SM Fiber: 33km (20.5 miles)

STANDARDS COMPLIANCE

• Laser Safety Compliance : Class 1
• SFP Regulatory Certifications : FDA CDRH 21 CFR 1040 and Laser Notice No. 50, UL and CUL EN60950–2:2007, RoHS6, EMC EN 55022 and EN 55024, IEC 62368–1 and IEC 60825–1 and — 2

Extended RS-232

• Baud Rate: 300 to 115200

User Interface

• Indicators: Source detection, sink detection, optical link and power LEDs
• Controls: Reset button

Power

• Consumption: 380mA
• Source: 12V DC, 2A

Environmental Conditions

• Operating Temperature: 0° to +40°C (32° to 104°F)
• Storage Temperature: –40° to +70°C (–40° to 158°F)
• Humidity: 10% to 90%, RHL non–condensing

Regulatory Compliance (Standards Compliance)

• Safety: CE, UL
• Environmental: RoHs, WEEE

Enclosure

• Size: Tool
• Type: Aluminum
• Cooling: Convection ventilation

Accessories

• Included: MM SFP+ transceiver, power adapter, power cord, mounting bracket set

Product Dimensions

• 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H

Product Weight

• 0.2kg (0.5lbs) approx.

Shipping Dimensions

• 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H

Shipping Weight

• 0.7kg (1.6lbs) approx.