K-Array KMC20H

K-Array KMC20H

K-Array KMC20H

K-Array KMC20H

Capture-KMC20H, Ultra-slim, 20cm-long brass line array microphone with preamplifier and brass base for horizontal mounting included

SKU: KRY-KMC20H

OVERVIEW

The K-Array Capture-KMC20 is the smallest line array microphone in the market featuring PAT technology composed of 8 x 4 mm cardioid capsules aligned in a line array configuration. The incredibly thin microphone has all the advantages of a K-array line array.

The base for the horizontal setup of the Capture is created from a single solid block of brass shaped with both a lathe and a milling cutter in the form of three concentric cylinders truncated at 60°. It contains two O-rings placed within the cylindrical connector that anchor the microphone in a perfectly horizontal position.

The microphone’s impressively slender frame is made from a 6x6 mm square brass bar. It is machined from milling cutter using bits with a radius of less than 2 mm and the product is meticulously pieced together welding 4 mm- and 2 mm-tall capsules to a 0.6 mm-thick electronic board. 5 mm-thick cuts run the entire length of the frame half a millimeter from the edge. Then the two 0.3 mm-thick stainless steel grills are micro-stretched over the cuts. The lattice is secured in place by two plates screwed one on top of the other.

FEATURES

  • Minimal variation of gain with distance
  • Wide vertical polar response
  • Narrow horizontal polar response
  • Line array characteristics
  • Minimum gain variation with distance
  • PAT technology
  • Ultra-black Ruthenium-plated brass
  • Horizontal and vertical setup
  • Mounting accessories
  • Discreet, invisible

SPECIFICATIONS

  • Transducer Type: 8 x 4 mm electret condenser
  • Frequency Response: 80 – 15000 Hz
  • Polar pattern: Cardioid array
  • Max Input Sound Level: (@ 1kHz-1Pa THD<10%):105dBSPL Sensitivity (@ 1kHz): -37dBV ±4dB
  • Signal to Noise Ratio: (@ 1kHz-1Pa A-weightedcurved): 55dB
  • Polarity:  Positive pressure on diaphragmproduces positive voltage on pin 2 with respect to pin 31
  • Current consumption: 7mA
  • Connector: Three-pin professional audio (XLR), male
  • Case: Ultra-black Ruthenium-plated brass
  • Phantom Supply Voltage: 36 to 52 Vdc, (+) pins 2 and31
  • Dimensions: 6 x 6 x 226 mm (0,24 x 0,24 x 8,90 inch)
  • Weight: 0,032 kg (0,07 lb)