Overview

Economical power protection with battery backup to protect electronics and other small loads.

Fits in a single rack space. Can also mount in a tower configuration.

Automatic voltage regulation ensures output voltage is maintained near standard operating levels.

Features

• 1000VA / 600 Watts
• Single rack space
• Line interactive design
• Fully digitized microprocessor controlled
• Tel/modem internet surge suppressor
• Voltage regulation boost and buck
• EMI / RFI noise filter
• Surge protection receptacle for critical load
• Power, backup and battery fault status LED
• Lightning and surge protection
• 50 / 60 Hz auto sensing
• Advanced battery management
• Energy saving (UPS sleep mode)
• RS-232 communication

Specifications

Input

• Capacity: 1000 VA, 600 Watt
• Voltage: 120 VAC
• Frequency: 50 or 60 Hz + / - 10% (auto sensing)

Output

• Voltage (on battery): Simulated sine wave, + / - 25% of line input
• Frequency (on battery): 50 or 60 Hz + / - 0.5%
• Automatic Voltage Regulation: Increases output voltage 15% when input voltage drops 9% to 25% below standard. Decreases output voltage 10% when voltage rises 9% to 25% above standard
• Transfer time to battery: 24 milliseconds

Protection

• Spike protection 320 Joules
• EMI / RFI filter: 10dB @ 0.15MHz, 50dB @ 30MHz
• Current overload protection: 60 seconds @ 110%, 3 seconds @130%

Battery

• Type: Sealed lead acid, maintenance free
• Quantity: (3) 6V, 8AH
• Recharge time (typical): 8 hours to 90% of capacity
• Protection: Automatic self test. Replace battery indicator
• Backup time: 3 - 180 minutes, depending on load

Physical

• Dimensions (W x D x H): 15.0 x 14.3 x 1.7 (1U)
• Weight: 25.3 lbs
• Line cord: 6 ft, 5-15P
• Receptacles
  
  • (4) NEMA 5-15R battery
  • (1) NEMA 5-15R bypass

Environment

• Operating temperature: 32 - 104 degrees F
• Audible noise: < 40 dBA
• Max altitude: 11,500 ft above sea level

Indicators

• Load on battery power: Slow beeping
• Battery low: Rapid beeping
• Overload: Continuous alarm sound