JBL VLA301I-WRX

JBL VLA301I-WRX

JBL VLA301I-WRX

JBL VLA301I-WRX

Three-way horn-loaded line array system (Extreme Weather Protection Treatment)

SKU: JBL-P3187MX

Overview


Three-Way Full Range Loudspeaker with 2 x 15" LF, 2 x 8" MF, 3 x 1.5" exit HF 30° Horizontal Dispersion

Variable Line Array Series (VLA Series) is a revolutionary product providing high-impact sound reinforcement at throw distances beyond the reach of traditional loudspeaker designs.


Features
  • Line array module optimized for permanent install applications.
  • Standard version featuring 3 HF drivers, 2 MF drivers & 2 LF drivers.
  • Advanced technology component transducers for low weight and high output.
  • Comprehensive rigging points for creating a line array configuration.
  • Rugged DuraFlexâ„¢ exterior finish and weatherized components. JBL's WRX weather protections


Specifications


Frequency Range (-10dB) 39 - 19.2kHz
Frequency Response (-6 dB) 43 - 19kHz
Frequency Response (-3 dB) 48 - 17.4kHz
Horizontal Coverage 30º Nominal (900 - 16kHz)
Vertical Coverage Varies with array size and configuration.
System Power Ratings (AES) LF: 1000W Continuous (IEC/100 hour)MF: 400W Continuous (IEC/100 hour)HF: 160W Continuous (IEC/100 hours)
Maximum SPL (1m) 147.5 dB (Preset: Flat)
LF Driver 2 x JBL 2265H, 15in diameter, dual 3in diameter voice coil, Neodymium Differential Drive
Nominal Impedance 4 ohms
Sensitivity (2.83V @ 1m) LF: 99dB/96dB
MF: 109dB/105dB
HF:109db/112dB
Mid-Frequency Driver 2 x JBL 2169H, 8in diameter, dual 3in diameter voice coil, Neodymium differential Drive
High-Frequency Driver 3 x 2432H 1.5in exit compression driver, 3in diameter voice coil, Neodymium Magnet
Enclosure 18mm and 16mm, Exterior grade Baltic birch plywood, DuraFlexTM finish or optional Fiberglass
Suspension Attachments 16 points (4 each top bottom & rear, 2 each side), M10 threaded hardware (eyebolts NOT included).
Finish Black DuraFlexTM (STD), Gray DuraFlexTM (WRC), Gray Fiberglass (WRX), optional colors; Stainless Steel Hardware (WRC/WRX)
Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperatures.
Grille Powder coated 14 gauge perforated steel, zinc-phosphate dipped, acoustically transparent foam backing (grill cloth backing on white units) (16 gauge stainless steel on WR versions)
Input Connectors Barrier Strip for #6 spade lug, including gland nut and cover plate
Environmental Mil-Std 810; IPx3 per IEC529. For higher environmental ratings, use WRC or WRX.
Dimensions (H x W x D) 528.3mm x 1346.2mm x 1379.2mm (20.8in x 53.0in x 54.3in)
Net Weight 139.3 kg (307 lb)