The PD743i Precision Directivity™ loudspeaker provides high-impact sound reinforcement at throw distances that are beyond the reach of traditional single-driver designs. A single module produces greater than 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i-215 may be used in clusters with other PD family modules or singly as part of a distributed system.
Overview
Very High Output Mid-High Loudspeaker System
Features
- 40° by 30° Coverage Pattern–symmetrical frontal dimensions allow horizontal or vertical orientation within an array.
- IFS™ Interference Free Summation dual HF driver module eliminates destructive interference and increases output by 6 dB.
- Dual 2432H compression drivers with 3” diaphragms
- Dual CMCD-82H 8” horn loaded cone mid-range drivers provide 6 dB greater output than traditional designs.
- Pattern control maintained to below 400 Hz.
- Co-axial mid/high-frequency module layout improves mid frequency arrayability and minimizes size.
- Integrated rigging system simplifies array design and construction.
Specifications
- Frequency Range (-10dB): 200 Hz to 19.5 kHz
- Frequency Response (±3 dB): 230 Hz - 18.5 kHz
- Coverage Pattern: 40° x 30°
- Directivity Index (DI): 16 dB
- System Sensitivity (1w @ 1m): Passive Mid-High: 110 dB SPL
- Maximum Peak SPL: MHF - 142 dB Peak Passive Mode
- Transducer Power Rating (AES): MHF - 400 W (1600 W Peak)
- Crossover Frequencies: 1.2 kHz
- DSP: Custom DSP for Crown ITHD and IT4x3500HD amplifiers
- MF Driver: 2 x JBL CMCD-82H midrange driver with 200 mm (8 in) diameterDifferential Drive® dual 75 mm (3 in) voice coil
- HF Driver: 2 x JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
- Nominal Impedance: MF: 4 ohms, HF: 16 ohms
- Enclosure: Trapezoidal with Rectangular sides, combination of 18 mm and 16 mm (5/8 in) exterior grade birch plywood
- Enclosure WRC/WRX Version: For direct exposure or extreme environments, berglassed with stainless steel hardware
- Grille: Black powder coated zinc treated 14 gauge perforated steel with black foam backing
- Grille WRC/WRX Version: Three layer grille assy consisting of 16-gauge powder coated S.S., backed with O.C. foam and S.S. mesh
- Input Connector: NL4 for bi-amp operation
- Input Connectors WRC/WRX Version: 4 conductor 16 awg direct burial cable assy 20 length (or length TBD)
- Suspension Attachment: 32 total points (7 top and bottom, 7 each side, 4 back), M10 threaded hardware
- Dimensions (H x W x D): 991 mm x 991 mm x 1145.8 mm (39.0 x 39.0 x 45.1 in)
- Net Weight (each): 245 lbs (111.4 kg)
- Crossover Modes: Passive
- System Power Rating: MHF - 400 W (1600 W Peak) (IEC rated)
- Environmental: Available WRC/WRX Version: IP55