JBL PD544

JBL PD544

JBL PD544

JBL PD544

15" 2-way full-range, 40 X 40

SKU: JBL-PD544
MSRP: $4,340.00
MAP: $4,340.00

Overview

15” Horn-Loaded Full-Range Loudspeaker System

PD544 is a Precision Directivity™ loudspeaker designed for applications requiring high output capability with excellent pattern control. PD544 can be utilized in music or speech systems where frequency extension to 80 Hz is adequate or combined with subwoofers to create extended bandwidth fullrange systems.

 

Features

  • 380 mm (15”) horn-loaded low-frequency driver
  • Large PT™ Progressive Transition™ waveguidesprovide broad band 40° x 40° pattern control, low distortion at high SPL levels and smooth frequency response
  • Rotatable waveguide allows for either horizontal or vertical cabinet orientation
  • Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes
  • Sports Facilities
  • Performance spaces
  • Auditoriums
  • Worship facilities

 

Specifications

  Frequency Range (-10 dB) 50Hz to 20kHz
  Frequency Response (±3 dB) 90Hz to 17kHz
  Coverage Pattern 40° x 40°
  Directivity Factor (Q) 31.5
  Directivity Index (DI) 15 dB
  Crossover Modes Bi-amp/Passive switchable
  Passive Crossover 1.2 kHz
  Transducer Power Ratings (AES) LF: 450W 2hrs, 300W 100hrs
HF: 75W, 2hrs, 50W 100hrs
  System Power Rating (IEC) Passive mode: 500W 2hrs, 300W 100hrs (IEC)
  Maximum SPL Bi-amp: LF: 133 cont (139 peak)
HF: 134 cont (140 peak)
Passive: 133 cont (139 peak)
  System Sensitivity (1W @ 1m) Passive Mode: 106 dB SPL
  Nominal Impedance 8 ohms
  Low Frequency Driver 2031H 380 mm (15 in) driver with 75 mm (3 in) voice coil
  Nominal Impedance 8 ohms
  Sensitivity (1W, 1m within operational band) 106 dB (avg 300Hz-1.3kHz)
  High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
  Nominal Impedance 8 ohms
  Sensitivity (1W @ 1m) 115 dB (avg 1.5k-5kHz)
  Waveguide HF: PT-H40HF-1 300 x 300 mm (12 x 12 in)
  Enclosure Trapezoidal with 10 degree side angles, 18 mm exterior grade 11-ply Finnish birch plywood.
  Suspension Attachment 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).
  Finish Black DuraFlex™ finish. White (-WH) available upon request.
  Optional Weather Resistant Versions WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature. See WRC/WRX configuration sheet for details.
  Grille Powder coated 14 gauge perforated steel, acoustically transparent and weather resistant cloth backing.
  Input Connectors CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
  Environmental Specifications Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.
  Dimensions (H x W x D in vertical orientation) 782.0 x 783.0 x 670.0 mm
(30.8 x 30.8 x 26.4 in)
  Net Weight 69.0 kg (152 lb)
  Optional Accessories 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.