JBL CBT 70JE-1

JBL CBT 70JE-1

JBL CBT 70JE-1

JBL CBT 70JE-1

EXTENSION FOR CBT 70J-1 COLUMN SPK, BLK

SKU: JBL-CBT 70JE-1
MSRP: $912.68
MAP: $731.00

Overview

When connected to a CBT 70J-1 line array column speaker, the CBT 70JE-1 Extension provides extended bass response, extended pattern control, and increased sound output levels. The combined array system provides Constant Beamwidth Technology™, which represents a breakthrough in pattern control consistency, utilizing complex analog beamforming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of passive column speakers.

Features

When connected to a CBT 70J-1 line array column speaker, the CBT 70JE-1 Extension provides extended bass response, extended pattern control, and increased sound output levels. The combined array system provides Constant Beamwidth Technology™, which represents a breakthrough in pattern control consistency, utilizing complex analog beamforming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of passive column speakers.

Specs

  Components Eight (8) 130 mm (5 in) LF drivers 
Sixteen (16) 25 mm (1 in) HF drivers
  Frequency Range (-10 db) 45 Hz – 20 kHz
  Coverage Vertical (selectable via switch) 
Narrow Mode: 25° (2 kHz – 16 kHz) (±10°) 
Broad Mode: 45° (350 Hz – 16 kHz) (±10°) 
Horizontal 150° (500 Hz – 18 kHz, ±20°)
  Sensitivity (@1m) Narrow: (speech mode) 98 dB @ 2.83V, 95 dB @ 2.0V (150 Hz – 8 kHz) 
(music mode) 94 dB @ 2.83V, 91 dB @ 2.0V (80 Hz – 18 kHz) 
Broad: (speech mode) 97 dB @ 2.83V, 94 dB @ 2.0V (100 – 8 kHz) 
(music mode) 93 dB @ 2.83V, 90 dB @ 2.0V (70 Hz – 18 kHz)
  Nominal Impedance 4 ohms
  Power Capacity 1000 W (4000 W peak), 2 hrs 
700 W (2800 W peak), 100 hrs
  Max SPL Narrow: (speech mode) 125 dB cont ave (131 peak) 
(music mode) 121 dB cont ave (127 peak) 
Broad: (speech mode) 124 dB cont ave (130 peak) 
(music mode) 120 dB cont ave (126 peak)
  Transducers  
  Low Frequency Drivers 8 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV and salt resistance, shielded.
  High Frequency Drivers 16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded.
  Enclosure Fiberglass-reinforced ABS cabinet, painted aluminum grille.
  Outdoor Capability IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
  Colors Black or white (-WH)
  Insert Points 20 insert points total, 8 utilized for coupler plate, M6 (16 mm deep)
on back panel
  Mounting Coupler plate joins the CBT70J-1 and 70JE-1 end-to-end. Threaded points on coupler plate accepts OmniMount™ 60.0 Series and 120.0 Series compatible wall-mount brackets, as well as points for the swivel (pan)/tilt wall bracket that is included with CBT 70J-1. Twelve (12) additional M6 mounting points accept forged shoulder steel eyebolts or swivel clips for suspension.
  Dimensions (H x W x D) 1388 x 170 x 237 mm
(54.8 x 6.7 x 9.3 in)
  Net Weight 20.4 kg (45 lb)
  Included Accessories Coupler plate (included with 70JE-1) 
Swivel (pan) / tilt wall bracket (included with 70J-1)
  Optional Accessories MTC-PC2 terminal panel cover 
MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty speaker stand (must be heavy-duty stand for stability with this array) 
MTC-CBT-FM2 flush-mount low-profile wall-mount bracket
  Components - 70JE-1 Four (4) 130 mm (5 in) LF drivers
  Frequency Range (-10 dB) - 70JE-1 45 Hz – 700 Hz
  Sensitivity (2.83V @ 1m) - 70JE-1 90 dB full space, 96 dB half-space 
(65 Hz - 300 Hz)
  Nominal Impedance - 70JE-1 8 ohms
  Power Capacity - 70JE-1 500 W (2000 W peak), 2 hrs 
350 W (1400 W peak), 100 hrs
  Max SPL - 70JE-1 117 dB
  Net Weight - 70JE-1 8.2 kg (18 lb)