JBL C25AV-LS-WH

JBL C25AV-LS-WH

JBL C25AV-LS-WH

JBL C25AV-LS-WH

5.25" 2-WAY SURFACE-MT SPK, AV VERSION W EN54-24, WHT

SKU: JBL-C25AV-LS-WH
MSRP: $302.48
MAP: $245.00

Overview

The Control® 25AV-LS built on the same platform as our popular Control 25AV and is UL 1480 UUMW Listed for use in fire alarm and/or emergency communication systems.

Features

  • UL 1480 UUMW Listed for Use in Fire Alarm and/or Emergency Communication Systems; EN54-24 certified
  • Video shielded for use near video monitors.
  • Extremely smooth frequency response.
  • Aluminum Grille with Polyester Powder Coating for enduring reliability.
  • 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
  • SonicGuard™ overload protection.
  • 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter.
  • Includes InvisiBall® mounting hardware and sealed input panel cover.
  • Screw-down input terminals.
  • 105° x 85° high frequency horn.

Specifications

  Freq. Range (-10 dB) 90 Hz - 20 kHz
  Power Capacity 200 Watts Continuous Program Power (at 8 ohm bypass mode)
100 Watts Continuous Pink Noise (at 8 ohm bypass mode)
60 Watts (at 60W tap setting)
  Transformer Taps 60W, 30W, 15W (& 7.5W @ 70V)
  Nominal Sensitivity 87dB, 1W at 1m (1kHz–10kHz, ave., at 8 ohm bypass mode);
71 dB, 1W at 4m per EN54-24 (100 Hz – 10 kHz, ave., 60W tap)
  Nominal Coverage Angle 110° x 85° (1kHz to 16kHz)
  Directivity Factor (Q) 4.8 (500 Hz to 4kHz)
  Directivity Index (DI) 6.5dB (500 Hz to 4kHz)
  Rated Maximum SPL 107 dB @ 1m (3.3 ft) average, 113 dB peak, at 8 ohms bypass mode, 89 dB at 4 m (13.2 ft.) average, at 60W tap setting, measured
  LF Driver 130mm (5.25 in) with polypropylene coated paper cone with
WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
  HF Driver 20mm (.75 in) titanium coated PEI
  Termination Captive screw-down terminals, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug, plus bare wire up to 12 AWG (2.5 mm)
  Cabinet Material ABS, (materials rated UL94-5VA)
  Grille Aluminum with polyester powder coating
  Environmental Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, IEC 529 IP-x5 splashproof rating
  Environmental Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
  Safety Agency UL1480-UUMW Listed (S7232), EN54-24:2008 certified (Certificate No. 0359-CPR-00245), NFPA90, NFPA70A, and in accordance with the requirements of IEC60849/EN60849
  Dimensions (H x W x D) 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
  Net Weight 3.8 kg (8.4 lbs) ea
  Shipping Weight 8.6 kg (19 lbs) pair
  Included Accessories 1 pc MTC-PC2 input panel cover, Invisiball mounting base, 6 mm x 100 mm Invisiball hex wrench
  Optional Accessories MTC-25V for vertical columnar mounting of up to 3 speakers MTC-25/23H for horizontal splaying of 2 speakers. Three brackets array either 3 or 6 speakers in a hanging array module for 360° horizontal coverage.
MTC-28/25CM to install speaker down from the ceiling.
See JBL Control Contractor Bracket and Adapter Handbook.