Overview

This product is a Class A HDBaseT compliant Sender (Transmitter) that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.

Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.

The HBX-S includes a universal 5v power supply. IR emitter and IR detector cables are also included.

Features

• Fully Compliant with HDBaseT standard
• Supports virtually all HDMI and DVI resolutions including 4K UHD
• Extends, Video, Audio, RS-232, IR, and Ethernet
• Supports extension to 100 m (330 ft)
• Fully isolates grounds between TX and RX sides
• Compact, Rugged, Reliable, and Economical
• Plug and play, no configuration needed
• Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs

Specifications

• Video Standards:
• DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
• 12 bit color depth, 3D video and 4K support)
• Signal Type: TMDS
• Resolutions:
• DVI signal - VGA (640x480) thru WUXGA (1920x1200)
• HDTV signal - 480i through 1080p
• Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m
• Audio Formats:
• All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD
• Master Audio (32-192 kHz sample rate)
• DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
• CEC: Pass-Thru CEC for Consumer Electronics Control compatible devices
• RS232: Bidirectional (full-duplex) any baud rate up to 115,200
• Ethernet: 100BaseT Ethernet LAN
• IR: Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
• Power Supply: 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
• Power: Sender & Receiver: 10 watts maximum
• Temp/humidity:
• Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
• Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
• Cooling: Convection
• Mounting: End plates with hole for surface mounting
• Enclosure type: Metal (Aluminum ends, Aluminum Extrusion)
• Dimensions:
• 1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D)
• Depth excludes connectors
• Product weight:
• Sender 9.3 oz (0.58 lb or 264 g)
• Receiver 10 oz (0.63 lb or 284 g)
• Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
• Safety: CE
• EMI/EMC: CE, FCC Class A
• MTBF: 90,000 hours (Calculated Estimate)
• Warranty: 3 years parts and labor