Overview

The CB-22S Smart Ceiling Enclosure is designed for classrooms, conference and meeting rooms with a projector and other AV equipment. This 2’x2’ enclosure drops into any standard drop ceiling installation and provides power switching and distribution as well as shelves to mount 2 full rack or 4 half rack pieces of equipment above the ceiling. The CB-22 Ceing

 

Enclosure provides one projector outlet facing the room and 2 un-switched and 3 switched ergonomically spaced AC outlets inside the box. A built in thermostatically controlled fan provides equipment cooling. It is a “Smart Green Enclosure”with Smart Sense technology that detects the power state of the projector and uses the projector’s power state to turn the switched outlets on or off. The cover is a white trim ring, similar to the ceiling grid, that holds a matching ceiling tile for a finished look.

 

The optional SG-120HW is a “Type 2 Surge Protective Device” used to protect branch circuits against damage from electrical transients occurring on the AC line. It provides protection against transients in all 3 modes; Line to Line, Line to Neutral, and Neutral to Ground. A diagnostic LED indicates ground presence, system power and that surge protection is active.

 

You can now mount in DryWall

The CB-SR22 drywall mounting frame is designed to easily mount FSR's 1'x2' (CB-12) Ceiling Enclosure. The mounting frame can be installed in the ceiling using threaded rod, stranded wire cable, or screws through specific holes in the sides of the unit. The ceiling box can then be hung vertically, via the included cables, while the equipment is mounted and wired allowing convenient access to the components and cables.

APPLICATIONS:

• Anywhere a Projector or Display is ceiling mounted
  • Made for 'T' Grid Drop Ceilings
  • Conference Centers
  • Schools
  • General Meeting Facilities
  • Training Facilities
  • Airports
  • Museums

•