Overview
Dante audio networking standard-compliant 1U rackmount stereo rack monitor with built-in amplifier
Dante is a registered trademark of Audinate, Inc.
The RM-3DT is a rackmount monitor with built-in 10W × 2 power amplifiers equipped with Dante® audio networking, a feature developed by Audinate that enables the transmission of multiple uncompressed digital audio signals.
Features
- Supports balanced analog input and Dante input.
- Power-saving design with digital amplifier and switching power supply.
- 26-dot LED meter display is selectable from VU, VU+PEAK, VU+PEAK hold, and PEAK+PEAK hold.
- The display brightness can be adjusted in four levels.
- Either or both of the 2-channel digital signals extracted from the Dante network signal can be output.
Specifications
|
Speaker section |
|
|
Unit |
110 x 40 mm cone type, magnetically shielded |
|
Impedance |
8 Ω |
|
Sound Pressure Level |
84 dB/W(1 m) |
|
Frequency response |
200 Hz to 20 kHz |
|
Power Amplifier Section |
|
|
Maximum output |
10 W x 2 |
|
Residual noise |
-50 dBV or less (DIN AUDIO) |
|
Distortion rate |
0.1% or less |
|
Dante Input |
Connector: Input RJ45 Format: Dante |
|
Analog input |
Connector: XLR-3-31 type Rated input level: XLR (balanced): +4/0 dBu Input Impedance: 10 kΩ min. |
|
Analog THRU output |
Connector: XLR-3-32 type |
|
Phones |
Connector: Φ6.3 mm stereophone Applicable load: Impedance 16 Ω or more Maximum output: 20 mW+20 mW (32 Ω, 1 kHz) |
|
Level meter |
Display: 26-dot LED x 2 Reference level: analog XLR: +4/0 dBu |
|
general |
|
|
External Dimensions |
482(W)×44(H)×284(D) (including protrusions) |
|
Weight |
Approx. 3.5 kg |
|
Power requirement |
AC100 V to 240 V 50/60 Hz |
|
Power consumption |
10 W (0.5 W or less in standby mode) |
