Overview
1U size stereo monitor speakers with amplifier.
Supports balanced/unbalanced analog input and AES/EBU digital input.
Power-saving design with digital amplifier and switching power supply.
26-dot LED level meter supports VU and PEAK display.
Features
- Space-saving 1U size and mountable in an EIA standard rack (rack mounting angle is removable).
- JIS standard racks are not supported.
- Class-D power amplifier with a maximum output of 10W + 10W.
- Equipped with 2 x 110 x 40 mm magnetic shielded elliptical cone full-range speakers.
- Analog input (XLR and PHONE combo type) and digital input (XLR, AES/EBU). Through-out for each input is also provided.
- Headphone output (20mW + 20mW). Speaker output is muted when headphones are used (plugged in).
- Equipped with mute and input source select switches.
- MUSIC and VOICE modes are provided. The playback frequency range can be selected according to the sound source and usage conditions.
- Monitor output can be selected from STEREO, L, R, or L+R.
- Highly visible 26-dot LED meter (L/R). LED brightness can be adjusted in four levels using the DIP switch on the rear panel.
- The LED brightness can be adjusted in four levels using the DIP switch on the rear panel.
- Standby mode is provided to suppress power consumption to 0.5W or less by keeping the input signal below a certain volume level for 4 hours or by pressing and holding the mute button (approx. 5 seconds).
Specifications
|
Speaker section |
|
|
Unit |
110 x 40mm cone type antimagnetic type |
|
Impedance |
8Ω |
|
Sound Pressure Level |
84dB/W(1m) |
|
Frequency response |
200Hz to 20kHz |
|
Power Amplifier Section |
|
|
Maximum output |
10W+10W |
|
Residual noise |
-50dBV or less (DIN AUDIO) |
|
Distortion rate |
0.1% or less |
|
Digital input |
Connector: XLR-3-31 type Format: IEC60958 (AES/EBU) Sampling frequency: 44.1kHz to 96kHz |
|
Analog input |
Connector: XLR/Φ6.3mm TS phone (combo type) Rated input level: +4/0dBu (XLR), -10/-14dBV (TS phone) Input impedance: 10kΩ min. |
|
Phones |
Connector: Φ6.3mm stereo phone Applicable load impedance: 16 ohms or more Maximum output: 20mW+20mW (32Ω/1kHz) |
|
general |
|
|
External Dimensions |
482(W)×44(H)×284(D) mm (including projections) |
|
Weight |
Approx. 3.5kg |
|
Power requirement |
AC100-240V (50/60Hz) |
|
Power consumption |
10W (0.5W or less in standby mode) |
