Overview
The 6301 series of compact active loudspeakers, which have been used for more than 30 years in broadcast facilities and small-scale loudspeakers, is now available in a model compatible with the Dante audio network standard.
Features
- The compact design common to all series allows for space-saving installation.
- Cone-type full-range speakers are used to achieve stable sound.
- Rugged die-cast aluminum enclosure is used.
- Flat design with minimal protrusion of switches and knobs to prevent damage even in the event of a fall.
- Switching power supply circuitry compatible with 100 VAC to 240 VAC power supplies.
- The product warranty is limited to use in Japan.
- Either or both of the 2-channel digital signals extracted from the Dante® network signal can be output.
- Incorporates Dante Ultimo chip. Supported sampling frequencies: 44.1/48/88.2/96 kHz
- An optional wall-mounting angle (EB-6301) allows for angle adjustment and wall mounting.
- Dante is a registered trademark of Audinate, Inc.
Specifications
|
Speaker section |
|
|
Enclosure type |
Closed type (Material: Aluminum die-cast) |
|
Unit |
Cone type 10cm full range unit x 1 |
|
Frequency response |
70Hz to 15kHz |
|
Sound Pressure Level |
85dB/W(1m) |
|
Maximum Sound Pressure Level |
98 dB |
|
Amplifier section |
|
|
Rated output |
20W |
|
Input connector |
Analog unbalanced/Φ6.3 mm (1/4″) TS phone, Dante/RJ45 (CAT5e or better) |
|
T.H.D. |
0.05 % (at 1 kHz 1 W output) |
|
Residual noise |
-65 dBV |
|
general |
|
|
External Dimensions |
120(W)×189(H)×120(D)mm *including maximum projection |
|
Weight |
Approx. 2.3 kg |
|
Power requirement |
AC 100 V to 240 V, 50/60 Hz |
|
Power consumption |
10 W *This product does not have an auto-standby function. |
|
Accessories |
Power cord (approx. 2 m) × 1 |
