ETC SELD60X-V-5

ETC SELD60X-V-5

ETC SELD60X-V-5

ETC SELD60X-V-5

D60X Vivid, Silver

SKU: ETC-7410A1701-5
MSRP: $3,905.00

Overview

ETC’s Desire Series D60X brings the amazing control of the x7 Color System and the long throw of a D60 to a portable, IP66 rated fixture. This luminaire is ready for mounting inside or outside–wherever you need it. The x7 Color System produces the widest range of spectrally-balanced saturated and tinted color choices available. The D60X offers a rugged die-cast enclosure, noiseless fan-free operation and multiple lens options that can be changed on-site.

D60X LED ARRAY OPTIONS

D60X luminaires are based on the x7 Color System that uses seven different LED colors to achieve true, usable broad spectrum color. The D60X luminaire is available with any one of the following x7 color arrays to best suit the intended application:

  • D60X Vivid – the x7 Color System array balanced for best all-around use as a color-changing wash luminaire.
  • D60X Lustr+ – optimized with six colors plus high-intensity white LEDs to create an ideal frontlight wash fixture. Full range color, with an
  • emphasis on lighter colors and white.
  • D60X Studio HD – Studio HD combines warm white and cool white LEDs for variable color temperature mixing. Added to this are five carefully chosen LED colors from the x7 Color System to fill in the white LED spectral gaps. D60X Studio HD provides the richest variable white light possible in an LED luminaire.

Also available in the following static white arrays:

  • D60X Studio Daylight – Studio Daylight contains sixty 5600 K LEDs for high-intensity, non-variable cool-white output
  • D60X Studio Tungsten – Studio Tungsten contains sixty 3000 K LEDs for high-intensity, non-variable warm-white output

Specifications

Source

  • LED details: 60 Lumileds LUXEON® Rebel LED
  • Max lumens
    • Vivid: 3,760
    • Lustr+: 4,317
    • Studio HD: 4,532
    • Studio Daylight: 8,216
    • Studio Tungsten: 6,482
  • Lumens per watt
    • Vivid: 31.9
    • Lustr+: 34.9
    • Studio HD: 33.4
    • Studio Daylight: 55.3
    • Studio Tungsten: 43.2
  • L70 rating (hours to 70% output): 50,000 hours

Color

  • Colors used
    • Lustr+: Red, Amber, Green, Cyan,
    • Blue, Indigo, White
    • Vivid: Red, Red-Orange, Amber,
    • Green, Cyan, Blue, Indigo
    • Studio HD: Red, Amber, Green/Cyan,
    • Blue, Warm White, Cool White
    • Studio Daylight: White
    • Studio Tungsten: White
  • Color temperature range: 2,700–6,500K
  • Calibrated array
    • Vivid: Yes
    • Lustr+: Yes
    • Studio HD: Yes
    • Studio Daylight: No
    • Studio Tungsten: No
  • Red shift: Yes (not available on static white)

Optical

  • Beam angle range: 8°–17°
  • Aperture size: 9 in
  • Pattern projection: No
  • Pattern size: N/A
  • Camera flicker control/Hz range: Yes: 900–25,000 Hz
  • Notes: Secondary lenses available for multiple beam-spread options

Control

  • Input method: DMX512 via termination board
  • Protocols: DMX512/RDM
  • Modes (footprint): See page 6
  • RDM configuration: Yes
  • UI type: None (configure via RDM)
  • Local control: No
  • Onboard presets: Yes
  • Onboard sequences: No
  • Onboard effects: No

Control

  • Onboard sequences: Yes
  • Onboard effects: No
  • Fixture-to-fixture control: Yes
  • Notes: 15-bit virtual dimming engine

Electrical

  • Voltage range: 100 VAC–240 VAC 50/60 Hz
  • Input method: Waterproof, 39 in power lead Requires power from non-dim source
  • Inrush
    • 46 A at 120 V (First half-cycle)
    • 77 A at 240 V (First half-cycle)
  • Fixtures per circuit*: 10 (15 A may be fed on same circuit)
  • Wattage typical: 124
  • Current draw: 1 A

Thermal

  • Ambient operating temp: -20°–40° C (-4°–104° F)
  • Fan (controllable): No
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 423.088

Physical

  • Materials: Die-cast, all metal housing
  • Color options: Black, white, silver, or custom color
  • IP rating: IP66 for exterior wet-location
  • Weight: 10.43 kg (23 lb)
  • Included accessories: Hanging yoke