Overview

The Selador Desire D40XTI brings the amazing control of the seven-color x7 Color System to your permanent application. With its IP66 rating, this fixture is ready for installation inside or outside – wherever you need it. The x7 Color System produces the widest range of spectrally- balanced saturated and tinted color choices available. The D40XTI offers a rugged die-cast enclosure, noiseless fan-free operation, and multiple lens options that can be changed on-site.

D40XTI LED Arrays

The D40XTI luminaire is available with any one of the following color arrays to best suit the intended application.

• D40XTI Vivid: Best all-around use as a color-changing wash fixture
• D40XTI Lustr+: Optimized with six colors plus high-intensity white LEDs to create an ideal frontlight wash fixture; full-range color, with an emphasis on lighter colors and white
• D40XTI Studio HD: Combines warm-white and cool-white LEDs with five carefully-chosen x7 LED colors, to fill in white LED spectral apps with variable color-temperature mixing for the richest variable white light possible in an LED fixture

Also available in the following static-white arrays:

• D40XTI Studio Daylight – Contains forty 5600 K LEDs for high-intensity, non-variable cool-white output
• D40XTI Studio Tungsten – Contains forty 3000 K LEDs for high-intensity, non-variable warm-white output

Specifications

Source

• LED details: 40 Lumileds LUXEON Rebel LED
• Max lumens: 4,332
• Lumens per watt: 43.1
• L70 rating (hours to 70% output): 50,000 hours

Color

• Colors used: White
• Color temperature range: 2,700-6,500 K
• Calibrated array: No
• Red shift: Yes (not available on static-white)

Optical

• Beam angle range: 8°–17°
• Gate size: N/A
• Aperture size: 7.5 in
• Pattern projection: No
• Pattern size: N/A
• Camera flicker control/Hz range: 900-25,000 Hz
• Notes: Secondary lenses available for multiple beam-spread options

Control

• Input method: DMX512 via termination board
• Protocols: DMX512/RDM
• Modes (footprint): N/A
• RDM configuration: Yes
• UI type: None (configure via RDM)
• Local control: No
• Onboard presets: Yes

Control

• Onboard sequences: Yes
• Onboard effects: No
• Fixture-to-fixture control: No
• Notes: 15-bit virtual dimming engine

Electrical

• Voltage range: 100-240 VAC 50/60 Hz
• Input method: Waterproof, 72 in power lead. Requires power from non-dimmable source
• Inrush: 15 A at 120 V (First half-cycle), 40 A at 240 V (First half-cycle)
• Fixtures per circuit: 10 (15 A may be fed on same circuit)
• Wattage typical: 110
• Current draw: 1/0.5 A

Thermal

• Ambient operating temp: 20°–40° C (-4°–104° F)
• Fan (controllable): No
• Droop compensation: Yes
• dB range: N/A
• BTUs/hour: 375.32

Physical

• Materials: Die-cast, all metal housing
• Color options: Black, white, silver, or custom color
• Mounting options: Single-pole mount, wall or square pole mount, twin fixture pole mount
• IP rating: IP66 for exterior, wet location use
• Weight: 6.8 kg (15 lb)
• Included accessories: Hanging yoke, termination board, accessory ring for installation of secondary lenses
• Notes: Cable diameter: Power 0.36 in / Data 0.34 in, Effective projected area (EPA): 0.74

Warranty

• Fixture: 5 years
• LED array: 10 years

Regulatory and Compliance

• Approved regulatory standards: cETLus Listed, Conforms to UL1598, Certified to CSA C22.2 No. 250.0, CE Compliant