Overview
ETC’s Selador Desire D22 luminaire puts the x7 Color System into a compact, round washlight. Highly efficient primary lenses and careful color choices make the D22 fixture ideal for stage, studio, architecture and anywhere vibrant color and high intensity are requirements. The x7 Color System produces the widest range of spectrally-balanced saturated and tinted color choices available, while the static-white options provide an impressive punch. D22’s rugged die-cast enclosure, noiseless fan-free operation, multiple lens options, convenient size and advanced user interface make it an ideal addition to the Desire family of LED luminaires.
D22 LED Array
D22 fixtures are available with any one of the following arrays (not interchangeable) to best suit the intended application.
- D22 Lustr+: Optimized array with six colors plus high-intensity white LEDs to create an ideal wash fixture for full-range color.
- D22 Studio Daylight: Contains twenty-two 5600 K LEDs for high-intensity, non-variable cool-white output
- D22 Studio Tungsten: Contains twenty-two 3000 K LEDs for high-intensity, non-variable warm-white output
- D22 Studio HD: Combines warm white and cool white LEDs for variable-color-temperature mixing. Added to this are carefully chosen colors from the Selador x7 Color System to fill in the white LED spectral gaps, providing the richest variable-white light possible in an LED fixture
D22 Mounting Configurations
D22 fixtures are available in three different mounting options to fit any installation:
- D22 Portable: Standard yoke-mount hardware; power lead with Edison/Schuko/UK13A connector and DMX in/thru connectors
- D22 Install Canopy: Standard yoke-mount and canopy hardware; power lead with bare ends; and a permanent, single DMX in/thru cable
- D22 Track-Yoke: One Track or DataTrack adapter and a single, permanent cable for both power and DMX in
Specifications
Source
- LED details: 22 Lumileds LUXEON® Rebel LED
- Max lumens
- Lustr+: 1,499
- Studio Daylight: 2,533
- Studio Tungsten: 2,096
- Studio HD: 1,247
- Lumens per watt
- Lustr+: 31
- Studio Daylight: 50
- Studio Tungsten: 41
- Studio HD: 31
- L70 rating (hours to 70% output): 50,000 hours
Color
- Colors used
- Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
- Vivid: Red, Red-Orange, Amber, Green, Cyan, Blue, Indigo
- Studio HD: Red, Amber, Green/Cyan, Blue, Warm White, Cool White
- Studio Daylight: White
- Studio Tungsten: White
- Color temperature range: 2,700–6,500 K
- Calibrated array
- Lustr+: Yes
- Studio Daylight: No
- Studio Tungsten: No
- Studio HD: Yes
- Red shift: Yes
Optical
- Beam angle: 8°–71°
- Aperture size: 6 in
- Pattern projection: No
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
Control
- Input method: DMX512 via 5-pin XLR (portable only) Permanent power input cable
- Protocols: DMX-512/RDM
- Modes (footprint): See page 5
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
Control
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
Electrical
- Voltage range: 100–240 VAC 50/60 Hz
- Input method
- Requires power from a non-dimmable source
- Portable: Edison, Schuko or UK13A connector
- Inrush (over first half-cycle)
- 17 A at 120 V
- 25 A at 240 V
- Fixtures per circuit*: 20 (R20 module or similar)
- Wattage typical: 56.5
- Current draw
- 58 A at 110 V
- 48 A at 120 V
- 29 A at 230 V
- 29 A at 240 V
Thermal
- Ambient operating temp: 0°–40° C (32°–104° F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 192.778
Physical
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Portable, install canopy, or track-yoke
- IP rating
- IP20 for portable and canopy versions
- IP40 for track version
- Weight: 3.13 kg (6.9 lb)
- Included accessories: Hanging yoke
