Overview

Source 4WRD II (Watt Reduction Device) LED is a replacement for a standard Source Four burner assembly that converts the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is nondestructive and takes less than a minute. In most cases it can even be done without breaking the fixture’s focus. Source 4WRD II LED is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements.

Applications

• Energy saving retrofits
• Houses of worship
• Universities and schools
• Hospitality
• Retail
• Exhibition centers
• Meeting rooms
• Clubs
• Theatres

Specifications

Source

• LED details : S4WRD II LED
• Max lumens (3200 K / 3200 K Gallery / Daylight Gallery) : 11,430 / 9,716 / 10,333
• Lumens per watt : (3200 K / 3200 K Gallery / Daylight Gallery) :
  • 120 V: 76.2 / 64.8 / 68.9
  • 230 V: 65.3 / 55.5 / 59.0
• L70 rating (hours to 70% output) : >45,000 hours

Color

• Colors used : Warm or Cool White
• Color temperature range : 3200 K 80 or 90+ CRI, 5900 K 90+ CRI
• Calibrated array : N/A
• Red shift : No

Optical

• Gate size : 79 mm
• Field angle range : Swappable lens tubes between 5–90 degrees
• Aperture size : Lens dependent
• Pattern projection : Yes
• Camera flicker control/ Hz range : No, not PWM dimmed

Control

• Input method : DMX Control or Line Dimmed*
• Protocols : DMX / RDM via RJ45
• Modes (Footprint) : 1 Channel (Intensity) for DMX
• RDM configuration : Yes
• UI type : 7-segment address display, local level control via UI
• Local control : Yes
• Onboard presets : No
• Onboard sequences : No
• Onboard effects : No
• Fixture to fixture control : No

Electrical

• Voltage range :
  • 114–125 V, 60 Hz (120 V)
  • 209–252 V, 50/60 Hz (230 V)
• Input method : Hardwired, 1 m cord, bare end or various connector options (120 V) Hardwired, 1 m cord, bare end (230 V)
• Inrush :
  • 30 A (first half-cycle) at 120 V
  • 12 A (first half-cycle) at 230 V
• Fixtures per circuit*:
  • 120 V: 14 (20 A switched circuit, R20 module or similar)
  • 230 V: 6 fixtures per non-dimmed circuit(ER15AFR module)
• Wattage (typical/Standby) :
  • 150 W / 1.2 W (120 V)
  • 175 W / 3.7 W (230 V)
• Current draw :
  • 26 A at 120 V
  • 75 A at 230 V
• Notes :
  • When using line dimming, see the S4WRD manual for dimmer setup.
  • When using line dimming, standby power is 0 W.

Thermal

• Ambient operating temperature : 5°–50° C (41°–122° F)
• Fan (controllable) : Yes (no)
• Droop compensation : No
• dB range : 28 dBa (average at 1 m)
• BTUs/hour :
  • 529 (120 V)
  • 597 (230 V)

Physical

• Materials : Die-cast aluminum
• Color options : Black, white, or custom color
• Mounting options : Yoke
• IP rating : IP-20, indoor only
• Weight : 3.73 lb (1.69 kg) (Retrofit only)
• Included accessories : Source 4WRD mounting post

Warranty

• fixture : 5 years
• LED array : 10 years

Regulatory and Compliance

• Approved regulatory standards :
• UL 1573 (complete luminaire)
• UL 1598C (retrofit kit)
• CSA C22.2 No. 166 (complete luminaire)
• CSA TIL B79-A (retrofit kit)
• CE Compliant