Overview

The Source Four LED Series 2 revolutionizes LED lighting. With optimized arrays and finely-tuned electronics, Series 2 offers a combination of light quality and output that cannot be matched.

Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture.

Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, we highly recommend that you use EDLT lens tubes. We also offer a special LED-only version of the 50° lens tube. Combine with available adapters to transform your fixture into a fully functional Fresnel or CYC light.

Specifications

Source

• LED details: 60 Lumileds LUXEON® Rebel LED
• Max lumens:
  • Series 2 Lustr: 8,667
  • Series 2 Daylight HD: 13,060
  • Series 2 Tungsten HD: 11,512
• Lumens per watt:
  • Series 2 Lustr: 51.9
  • Series 2 Daylight HD: 52.7
  • Series 2 Tungsten HD: 55.3
• L70 rating (hours to 70% output)*:
  • Lustr: 54,000 hours
  • Daylight/Tungsten HD: >60,000 hours

Color

• Colors used:
  • Series 2 Lustr: Red, Amber, Lime, green, Cyan, Blue, Indigo
  • Series 2 Daylight HD: Red, Mint, Blue, Indigo
  • Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
• Color temperature range: Series 2 Lustr: 2,200–6,500 K*
• Calibrated array: Yes
• Red shift: Yes (can be disabled)

Optical

• Beam angle range: Swappable lens tubes between 5°–90°
• Gate size: 80 mm
• Aperture size:25–14 in (depending on lens tube)
• Pattern projection: Yes
• Pattern size: A or B
• Camera flicker control/Hz range: Yes: 900–25,000 Hz
• Note: Can be used with LED CYC and Fresnel adapters

Control

• Input method: DMX512 via 5-pin XLR
• Protocols: DMX512/RDM
• Modes (footprint): 4 modes
• RDM configuration: Yes
• UI type: LCD
• Local control: Yes
• Onboard presets: Yes
• Onboard sequences: Yes
• Onboard effects: No
• FixtureLink: Yes
• Notes: 15-bit virtual dimming engine

Electrical

• Voltage range: 100–240 VAC 50/60 Hz
• Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
• Inrush:
  • 50 A at 120 V (First half-cycle)
  • 107 A at 240 V (First half-cycle)
• Fixtures per circuit:
  • 9 Lustr or 7 Daylight HD/Tungsten HD (15 A via power thru connector)
  • 10 Lustr or 8 Daylight HD/Tungsten HD (via R20 module or Echo Relay Panel)
• Wattage typical:
  • Series 2 Lustr: 167
  • Series 2 Daylight HD: 248
  • Series 2 Tungsten HD: 208
• Current draw:
  • Series 2 Lustr:
    • 44 A at 120 V
    • 78 A at 240 V
  • Series 2 Daylight HD:
    • 75 A at 120 V
    • 93 A at 240 V
  • Series 2 Tungsten HD:
    • 08 A at 120 V
    • 93 A at 240 V

Thermal

• Ambient operating temp: 0°–40° C (32°–104° F)
• Fan (controllable): Yes (yes)
• Droop compensation: Yes
• dB range:5 dBA average at 1 m
• BTUs/hour:
  • Series 2 Lustr: 569
  • Series 2 Daylight HD: 846
  • Series 2 Tungsten HD: 709

Physical

• Materials: Die-cast, all metal housing
• Color options: Black, white, silver, or custom color
• Mounting options: Yoke, cyc floor stand (sold separately)
• IP rating: IP20
• Weight:
  • With barrel: 8.3 kg (18.3 lb)
  • Without barrel: 6.5 kg (14.3 lb)
• Included accessories: Hanging yoke, 1.5 m power cable, soft-focus diffuser in an A-size gobo holder, gel frame
• Note:
  • Positive locking double-clutch fixture body
  • Slot for glass or stainless steel patterns and soft focus diffuser
  • Wide accessory slot with sliding cover for motorized pattern device or iris

Warranty

• Fixture: 5 years
• LED array: 10 years

Regulatory and Compliance

• Approved regulatory standards:
  • cETLus Listed
  • Conforms to UL1573
  • Certified to C22.2 C22.#166
  • CE Compliant