Overview

A non-obtrusive, retractable hanging/plugging device for architectural surroundings.

APPLICATIONS

• Convention centers
• Hotel ballrooms
• Large meeting rooms

Features

• Non-obtrusive, retractable device
• Rated for up to 1,000 pounds
• Two-position mechanism - stored, working
• All wiring housed inside
• Simple ceiling plate with finger-operated latch
• UL and cUL Listed
• Receptacle configurations:
  • 4 - Edison
  • 4 - Stage pin
  • 4 - Twist-Lock
• A DMX receptacle can replace any one power connector

Specifications

GENERAL

• Designed to hang and power standard theatrical lighting fixtures
• UL and cUL LISTED

ELECTRICAL

• Receptacles wired through flexible conduit to a terminal box on fixed upper section of device
• 4 panel mount outlets on sliding section, connector options include:
  • 20A Parallel Blade (Edison NEMA 5-20R)
  • 20A Stage Pin
  • 20A Twist-Lock (NEMA L5-20R)
• Low-Voltage Connector Option – in place of one power connector:
  • 5-Pin XLR connector for DMX

MECHANICAL

• 11-gauge steel construction
• Fine-textured, scratch resistant white powder-coat paint
• Standard 5 square-inch white ceiling plate with latch
• Supports up to 1,000 pounds within 6” of center
• Supports up to 300 pounds from any point on the included pipe
• Installation mounting hardware for permanent support-
• connection to structure required by others
• Finger operated latching mechanism holds sliding device in place above ceiling
• Spring loaded system prevents rapid descent
• 26 inch clearance required for RLP in stored position (Ceiling to top of unit)
• 16 inch drop from ceiling to ceiling plate in working position (Ceiling to bottom of unit)
• 42 inch Schedule 40 1-1/2 inch black pipe included