Overview
These instructions are intended to accompany the Relevé Spot Gobo Carrier Kit (ETC model RELGOBOKIT / part number 2510K1000). Refer to this guide for proper specification of gobo media materials, image sizes, and instructions for assembly to the gobo carrier.2510A4082 2510K1006
Gobo Carrier Kit includes:
- one Relevé Spot gobo carrier
- one sheet of gobo adhesive including 2 rings (one for assembly, plus a spare) this guide
Specifications
- Overall media size is Ø 45.5 mm.
- Overall image size is Ø 36 mm.
- ETC recommends that you include alignment marks on the media for alignment to the gobo carrier. This provides consistent orientation between luminaires.
- Material should be 1.1 mm BOROFLOAT® or 0.008 inch steel. Relevé Spot luminaires have not been tested for use with aluminum gobos.
- For best results, ETC recommends coatings of dark mirror for BOROFLOAT material or use of flat black paint for steel material.
- The artwork must be mirrored on the gobo as it is flipped vertically and horizontally when projected.