Overview
The Paradigm Network Station Power Supply provides station bus power and data for up to 63 stations with only a network connection to your Paradigm Processor. Adding stations to your system that are outside the distance limit of the LinkConnect bus is simple by adding a P-NSPS-D anywhere you have a network port. Each Paradigm Architectural Control Processor (P-ACP) can support up to five Network Station Power Supplies and up to 128 total stations and sensors.
Applications
- Houses of worship
- Schools
- Restaurants
- Hotels
- Museums
- Casinos
- Ballrooms
Features
- DIN rail mounting
- LinkConnect: The two wire topology-free system gives you the freedom to put stations where you need them
- Up to 63 stations
- Up to 500 m (1,640 ft) of station wiring per P-NSPS-D
- Up to five P-NSPS-D per Paradigm Processor
- Network connection to Paradigm Processor allows you to add
- stations anywhere you have a network port
- LCD display with system status
- LON bus management including station connect and
- disconnect from onboard display
REGULATORY AND COMPLIANCE
- cULus Listed
- CE Compliant
Specifications
FUNCTIONAL
- LinkConnect: Provides Echelon® LonTalk® with LinkPower for up to 63 stations
- Provides 500 m (1,640 ft) of station bus power
- Communicates with Paradigm ACP over the lighting network
MECHANICAL
- P-NSPS-D is eight unit wide DIN Enclosure
- 48 V power supply is four unit wide DIN Enclosure
- Complies with DIN43880 (35/7.5 rail)
- 5 mm (.060”) aluminum construction
- Fine-textured, scratch-resistant, powder coat paint
- Convection cooled
- Front-panel display and LED status indicators
ELECTRICAL
- 48 VDC input from included power supply
- RJ45 socket with data LED supporting 10/100Base-TX
- Ethernet supporting static IPv4 addressing
- Echelon LinkPower communications with remote devices, including button stations, button/fader stations, touchscreen stations, and sensors
THERMAL
- Ambient room temperature: 0°C to 50° C (32°F to 122° F)
- Ambient humidity: 0%–95% non-condensing
