Overview

Mosaic Input/Output Modules expand the advanced show control capabilities of Mosaic allowing interaction with external triggers and systems. Remote I/O modules offer tri-mode inputs or relay outputs and an integrated, bidirectional serial port (RS-232/RS-485) for interfacing to third-party equipment. The module uses simple and reliable Ethernet topology with Power-over-Ethernet (PoE) to connect to supported controllers.

APPLICATIONS

• Integration with third-party products and systems

FEATURES

• Individually configurable tri-mode inputs with support for digital, analog, or contact closure
• Multiple protocol serial port including RS-232/485 serial, or output for 96 DMX channels
• Up to 200 modules supported in a single control system
• Power-over-Ethernet (PoE) powered
• Programmed and configured using Mosaic Designer Software

REGULATORY AND COMPLIANCE

• cETLus Listed
  • Conforms to UL-60950-1
  • Certified to CAN/CSA-C22.2No.60950-1
• CE Compliant
• California Title 20/24 complian

Specifications

FUNCTIONAL

• MRIO-80-Eight configurable tri-mode inputs configurable for digital, analog, or contact closure
• MRIO-44-Four configurable tri-mode inputs and four relay outputs
• MRIO 08 - Eight fully isolated relay outputs
• RS-232/485 serial output, or up to 96 channels of DMX output
• Tri-modeinputssupport:
  • Digital In - Presence of voltage between input and ground. supports active-high and active-low
  • Analog In-Uses voltage range as a trigger
  • Contact Closure - Uses a voltage-free switch between input and ground
• Relay outputs generate outputs to external systems
• Five-year warranty

MECHANICAL

• Four-unit wide DIN enclosure complies with DIN 43880 and EN60715 (35/7.5rail)
• Rugged aluminum enclosure
• Rotary switch for selecting network address
• All connections use pluggable rising clamp terminals

ELECTRICAL

• RJ45 connection supports 10/100Base-TX Ethernet
  • Link and data LEDs
  • Static and DHCP addressing support
• PoE powered (IEEE 802.3af, Class 1) 1.5 W typical draw
• Isolated tri-mode inputs are rated for:
  • Digital - 24 VDC maximum, internal 2 MOhm pull down
  • Analog-0–24VDC range configurable in software
  • Contact Closure - Voltage-free with internal 2.2 kOhm pull-up to 5 VDC
• Isolated relay outputs are rated for:
  • 1 KV isolation per relay
  • 250 mA at 48 V AC/DC
• RS-232 or RS-485 bidirectional serial with support for free syntax ASCII, HEX or Decimal formats
  • May be used for DMX output of up to 96 addresses
• Wiring connections made using pluggable 0.2 in (5 mm) rising clamp terminals

THERMAL

• Ambient temperature: 0°C to 50°C (32°F to 122°F)
• 10%–50%relative humidity, non-condensing