Overview

Using ETC’s Electronic Silent* (ES) technology and a convectioncooled design, this high-performance dimmer can be used with any 750W or less tungsten fixture. By taking DMX control signals directly, this self-dimming tungsten fixture can now reside alongside LEDs and moving lights, allowing system designs to focus on switched power and data distribution instead of centralized dimming systems.

APPLICATIONS

• Applications requiring distributed dimming and position flexibility:
  • Theaters
  • Hybrid incandescent, LED and discharge systems
  • Industrial productions
  • Rentals
  • Conference and exhibition centers
  • Multi-use venues such as schools and meeting rooms

FEATURES

• ES Dimming technology
  • Produces no lamp noise (exceeds all risetime specs)
  • Electronics sound-pressure level less than 0dBA at 1meter
  • Convection-cooled
• ANSI E1.20 RDM and ANSI E1.11 DMX512A
• Yoke-mount and pipe-mount brackets included, directmounting on a fixture yoke or to a pipe in multiple orientations to accommodate maximum flexibility (C-Clamps sold separately)
• Local operation
  • One-press dim to FULL for easy focusing (press again to release to DMX input)
  • Up and down level control
  • Returns to previous level after power loss

GENERAL

• Designed for use with all tungsten fixtures up to 750 watts
• Electronic Silent technology for operation free of dimmerand lamp-filament noise
• Changes your fixture into a truly distributed fixture with onboard dimming and control
• Electronic Dimming with harmonic and noise suppression
• • Acoustic specification replaces dimmer rise time

MECHANICAL

• Manufactured of epoxy-painted aluminum body and anodised aluminum heat sink
• Multiple yoke-fixing hole combinations for flexible mounting to the fixture
• Convection-cooled; operates without cooling fans
• Available in three colors: Black, White, or Silver

ELECTRICAL

• Input power feed:
  • Suggested breaker sizing: 20A
  • Voltage ranges: 85-140V, 180-260V
  • Frequency range: 47-63Hz
• 115V output regulation options for 208V operation:
  • Accoustic specification replaces risetime
• Bare-end or connectorized power cable input (Edison, Stage Pin, or Twist)
• Bare-end or connectorized power cable output (Edison, Stage Pin, or Twist)
• 2500V isolation between control and power components
• Max output 750W
• DMX* In and Thru
• DMX thru is not self-terminating
• Electronic overcurrent protection

*Represents 1/4 unit device load for purpose of calculating DMX daisy -chain device count (max 32 unit devices per DMX chain)

THERMAL

• Maximum ambient temperature 104°F
• Humidity between 10 95%, non-condensing
• Convection-cooled
• Optimum cooling when mounted with heatsink fins in vertical position
• 171 Btu at full load