Overview

The Echoflex Contact Input Interface offers four inputs to interface with third-party devices and control systems. Each input has two terminals (+5V, Input) for interfacing with almost any equipment creating a hybrid control solution. When the two terminals are bridged through an external dry contact, the input triggers transmission of a telegram based on standard profiles (EEP).

Supported EEP’s include

• Key card Activated Switch
• Rocker Switch
• Occupancy Sensor
• Window/Door Contact

Each channel can then be linked to the same or different receivers so when the input is activated, a wireless telegram is sent representing the input’s state.

The Contact Input Interface is the easiest method of integrating wireless devices into existing panels, wired control systems, or energy management systems.

Panic scenarios that may include a lock-down, fire alarm or security breach can now access the distributed lighting controls and force lights on. Integrate the interface with existing control systems to deliver time- of-day scheduled events to the wireless controllers allowing you to stay with a single front-end solution.

Specifications

Mechanical Specifications

• Operating Temperature: -10 to 45°C / 14 to 113°F
• Relative Humidity: 5 to 95% non-condensing
• Weight: 111g (3.9oz)
• Dimensions: 76.2 x 127 x 27 mm (3 x 5 x 1“)
• Mounting: Two screws (not included)

Hardware Specifications

• Power Supply: 8-30VDC or 24VAC power input, 250mA maximum draw
• Inputs: Three buttons: Channel Select, EEP Select, Teach Four +5V input channels
• Outputs: Two bi-color LEDs per channel: Channel Mode, Channel State

Communications

• Radio Frequency: 902 MHz
• Antenna: Whip
• Transmission Range: 24 m (80 ft) - commercial office spaces (typical), up to 100m (330 ft) line of sight