Overview
Unison DRd power modules are designed for use in all DRd enclosures. Whether you need forward-phase or reverse-phase SCR dimming, relay control, or specialty power control Unison DRd has you covered.
Most modules provide two circuits of control for a wide range of applications. All modules feature modular installation and removal, fully magnetic circuit breakers, and rock-solid construction.
Applications
- Tungsten lighting
- Non-dim loads
- Moving lights, fog machines, and powered effects
- Electronic transformers
- Electronic LED power supplies
- 2-wire Fluorescent ballast
- 4-wire Fluorescent ballast
- Quartz lighting
- Neon lighting
- Cold Cathode lighting
Features
- High-density modular assembly
- Die-cast aluminum chassis
- Fully magnetic circuit breakers
- Temperature sensors
Specifications
GENERAL
- Rated for continuous duty at 100% of rated load
- Modules rated for 10 A, 15 A, and 20 A circuits
PHYSICAL
- Modular plug-in assemblies
- Cast aluminum chassis, finished with textured epoxy paint
- Keyed to prevent insertion in inappropriately rated enclosure positions
REGULATORY AND COMPLIANCE
- cULus Listed for use in Unison DRd Dimming Enclosure
- CIRCUIT BREAKERS
- Fully magnetic to eliminate nuisance tripping
- 20x inrush current rating
- (PhaseAdept and ELV modules rated at 10x inrush)
- 125%, 10–120 seconds, must-trip rating
- Rated for 100% switching duty applications
- SHORT CIRCUIT RATINGS
- 100,000 A Short Circuit Current Rating (SCCR)
- Modules withstand hot-patching of cold loads up to full rating
POWER DEVICE
- Sealed, patented assembly
- Field-replaceable with screwdriver
- Excludes PhaseAdept and ELV modules
- Two back-to-back SCRs per circuit for D15/D20 modules
- Per-circuit LED indicators
- Mechanical held air gap relay
- Integral bonded heatsink
- Integral temperature sensor
- FILTERING
- High quality toroidal choke filters (see module chart for rise times)
DIMMING PERFORMANCE
- Dimming of 2- and 4-wire fluorescent ballast is dependent on lamp ballast combination. 4-wire fluorescent control requires optional 0-10V control card
- Phase dimming performance for LED lamps varies considerably depending on the manufacturer and model. Visit http://www.etcconnect.com/compatibility/ for details on a variety of specific lamps and information on how to send samples to ETC for testing
- PhaseAdept (LED) modules provide forward- or reverse-phase dimming and are compatible with any ETC Unison DR, Unison DRd or Sensor enclosure, including legacy products
- ELV modules provide forward- or reverse- phase dimming and are compatible with Unison DRd enclosures
