Overview

X12i-GRID and X12i-RIGKIT line array rigging system

The X12i-GRID and X12i-RIGKIT are accessories that can suspend up to twelve X1i or X2i elements. The grid connects to the top element in the array and is suspended from the venue. At least one grid is required at the top of the array. A second grid may be used at the bottom of the array to create a pullback point to the venue. The rigging kit is used to suspend each element in the array to the element above, or to the grid. Use one rigging kit for each element in the loudspeaker array. The X12i-GRID and X12i-RIGKIT use aluminum plates and stainless steel hardware to ensure the rigging components will not corrode over time in direct exposure environments.

X1i and X2i rigging methods

There are two methods of deploying X1i and X2i line arrays: With a custom frame, or with the optional Electro-Voice grid and rigging kits. The Electro-Voice grid and rigging kits (sold separately) are a cost-effective method to suspend smaller, simple arrays quickly. One rigging kit is needed for each element in the array. Each array requires at least one grid. Larger and more complex arrays will require a custom frame. Custom frames are not designed or provided by Electro-Voice and need to be provided by third parties.

In general, the grid and rigging kits can be used when:

• the array consists of twelve or fewer elements.
• the array does not require a steep down angle.
• the array does not have excessive curvature.

In general, a custom rigging frame should be used when:

• more than twelve elements are needed in the array.
• the application requires a steep down angle.
• the array requires excessive curvature.
• other loudspeakers, such as the X12i subwoofer, need to be suspended in the same array.