Features
- High-power LF supplement to TX2152
- Low-distortion port design
- Two high-excursion EVS-18S woofers
- Use with processor and dedicated amp channel
- 103 dB sensitivity, 138 dB max SPL
- Power handling: 1000 W continuous, 4000 W peak
- Mount points (6) for optional wheel kit
- Braced plywood/MDF enclosure
- Black EVCoat™ finish
Specifications
| Freq. Response¹ (-3 dB) | 50 Hz - 160 Hz |
| Freq. Range¹ (-10 dB) | 40 Hz - 1.5 kHz |
| Rec. Low Pass Frequency | 80 Hz - 120 Hz |
Specifications | |
| Axial Sensitivity¹ | 103 dB (1W/1m) |
| Max. Calculated SPL¹ | 138 dB |
| Horizontal Coverage | Omnidirectional |
| Vertical Coverage | Omnidirectional |
| Power Handling | 1000W Continuous, 4000W Peak |
| LF Transducers | (2) EVS-18S, 18 in (457mm) Drivers |
| Nominal Impedance | 4 Ohms |
| Minimum Impedance | 2.9 Ohms |
| Connectors | (2) Neutrik Speakon NL4's |
| Enclosure Material | Plywood and MDF with EVCoatᵀᴹ |
| Grille | 16 GA Steel, Black Powdercoat, with Rotatable Logo |
| Dimensions (H x W x D) | 45.4" x 20.0" x 27.2" (1154mm x 508mm x 691mm) |
| Net Weight | 123.5 lbs (56.1 kg) |
| Shipping Weight | 139.0 lbs (63.1 kg) |
Electro-Voice
Electro-Voice TX2152
1000 watts, dual 15-inch two-way, passive, 60° x 40° horn pattern, SMX2151 woofers, ND2 compression driver, Backbone grille, angled input panel, rotatable logo, (6) M10 suspension points, black EVCOAT.
Electro-Voice
Electro-Voice PA430T
30-watt constant-directivity paging projector, 60° x 40°, weather resistant, integral swivel bracket, 30-watt 25/70.7/100-volt transformer (30-, 15-, 7.5-, 3.7- and 1.9-watt taps), tan
Electro-Voice
Electro-Voice CSG
CSG, KIT, ACCESSORY, SINGLE GLAND NUT COVER, EVA, EVC, EVF, AND EVH
Electro-Voice
Electro-Voice CDNL4
CDNL4, KIT, ACCESSORY, DUAL NL4 COVER, EVA, EVC, EVF, AND EVH
Electro-Voice
Electro-Voice PCL35
Fixed height loudspeaker pole with M20 thread for use with EKX, ETX, ELX200, and TX1181 subwoofers. 35 inch height.
Electro-Voice
Electro-Voice TX1122
500 watts, 12-inch two-way, passive, 90° x 50° horn pattern, SMX2120 woofer, DH3 compression driver, Backbone grille, integrated pole mount, angled input panel, rotatable logo, (6) M10 suspension points, black EVCOAT.
Electro-Voice
Electro-Voice HM7
Headworn condenser cardioid mic with TA4F wired for R100, RE-2, RE-1 and any Telex Wireless
Electro-Voice
Electro-Voice XLD281
Very Compact line-array cabinet (Tri-amp/Bi-amp) with passive network for bi-amp operation, 2 X 8" DVN2080, 2 X ND2, 120° x 10°, black