Overview
The Electro-Voice Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. This particular model comes in a white wrinkle powder coat finish.
The Mb300 is used in conjunction with the Mb200 installation bracket to create a speaker array. The array can be constructed in either of two angular configurations:
- Speakers side by side (50° angle) for a tight array
- Speakers spread slightly (60° angle) for wider coverage
(Note that a full 360° array can only be accomplished with the 60° angle pattern.)
Suspension of the speaker array is made easy with the (4) 0.5" (12.7mm) holes located on the Mb300. A cable, chain quick link, or other suitable hardware which is rated for overhead lifting (not supplied with this kit) can be used to connect to the array for flying.
Specifications
- Suspension Holes: 4(four) 12.7-mm (0.5") in diameter
- MB300 Mounting Holes: 4(four) 8-mm (5/16") in diameter
- Material: 10-gauge cold-rolled steel
- Finish: Wrinkled powder coat
- Net Weight: 8.0lb (3.63kg)
- Shipping Weight: 9.0lb (4.08kg)
