Overview
EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVF, EVH, EVA, and EVU).
The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.
The EVC series is an extremely cost-effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 suspension points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG (6 mm). The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.
For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK-150 audio transformer. Adding a TK-150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. An EVC loudspeaker with a transformer installed sounds virtually identical to the same model without a transformer.
Features
- 8-inch, two-way loudspeaker, with 90Ëš x 60Ëš constant directivity, rotatable waveguide.
- Power rating: 200 W Continuous, (800 W Peak).
- Passive system: 91 dB, 120 dB maximum
- Gland nut cover and stainless steel grille on PI versions.
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end over 70V/100V lines
Specifications
| Max Calculated SPL | 120dB |
| Rotatable coverage | 90° x 60° |
| Frequency Range (-10 dB) | 55Hz-25kHz |
| Weight Net | 24.69lbs (11.2kg) |
| Axial Sensitivity (SPL, 1 W @ 1 m) | 91dB |
| Color | Black |
| Connectors | Dual four-pin 10 AWG (6 mm) Phoenix/Euro Block screw-terminals |
| Dimensions (H x W x D) | 492 x 248 x 277mm |
| Enclosure | 15mm weather-resistant plywood with EV Coat |
| Environmental Specs | IEC 60529, IP44 (IP55 for PI versions) |
| Frequency Response (-3 dB) | 75Hz-21Hz |
| Grille | 18 GA cold-rolled steel with rotatable logo (18 GA stainless steel with hydrophobic cloth on PI models) |
| HF Transducer | DH-2005 |
| LF Transducer | EVS-2008 |
| Minimum Impedance | 6Ω |
| Nominal Impedance | 8Ω |
| Passive crossover frequency | 1.8kHz |
| Power Handling (Continuous / Peak) | 200/400/800W |
| Rec. high-pass frequency, 4th Order | 50 Hz for 8Ω (50 Hz with TK-150 transformer) |
| Shipping Weight | 28lbs (12.7kg) |
| Suspension | eight M10 Suspension Points, optional U Bracket or pan/tilt wall mount |
