Overview

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental firms and system integrators. The RADIUS articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more. EAWmosaic™ app provides total system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, RADIUS delivers an intelligent and flexible system to fit any budget.

Features

OptiLogic™
OptiLogic™ provides array self-detection via onboard infrared sensors and accelerometers for near-instant optimization that cuts down on setup and tuning time.

EAWmosaic™
Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue.

EAW acoustical design
Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.

Integrated Dante™
Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.

Specifications

Configuration

• Subsystem
• Transducer: LF – 2 x 12 in cone, 2.5 in voice coil; HF – 2 x 1 in exit, 1.7 in voice coil compression drivers.
• Loading: LF – Vented; HF – Horn-loaded
• Operating Mode
• Amplifier Channels: Bi-amp LF, HF
• External Signal Processing: DSP w/EAW Focusing™ and DynO™

Performance

• Operating Range: 50 Hz to 19 kHz
• Nominal Beamwidth
• Horizontal 90°
• Vertical 12°
• Calculated Axial Output Limit (whole space SPL)
• Peak: 142 dB LF, HF
• Input
• Type: Electronically balanced
• Max Input Level: 21dBu
• Impedance: 20 kOhm (balanced)
• Input Wiring: XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
• Input Selection: Analog, Dante
• Amplifiers & Processing (LF/MF/HF)
• Type: Modified Class D
• Maximum Output: LF:1000W / HF: 500W
• Driver Protection: Integral DSP limiting
• AC Mains (nominal)
• Connector: Neutrik PowerCon®
• Input: 100 V to 240 V
• Frequency: 50 Hz to 60 Hz
• PowerConsumption: Idle – 26W
• Peak Draw – 250 W
• Controls/Communication
• Connections: 2x Neutrik® etherCON™, RJ-45
• Protocols: Ethernet/Dante
• Software: EAWmosaic™ (available on the App Store)
• Indicators: LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)
• User Controls: Push-button Rotary Encoder
• Weights (pounds/kilograms) Net: 78Ibs/35kg
• Dimensions: 14x32x20.38in / 355.6×812.8×517.7mm