Overview

Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue.

Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.

Four pre-defined voicings provide a variety of tonal starting points while also offering maximum feedback stability.

Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.

Low latency of just 2.6 ms provides excellent transparency for vocal monitoring applications

Specifications

Configuration

• Subsystem
• Transducer: 1 x 12 in cone, 2.5 in voice coil; HF – 1 x 1 in exit, 1.77 in voice coil compression driver
• Loading: LF – Vented; HF – Horn-loaded
• Operating Mode
• Amplifier Channels: Bi-amp (LF/HF)
• Signal Processing: DSP w/EAW Focusing™and DynO™

Performance

• Operating Range: 55 Hz to 18 kHz
• Nominal Beamwidth
• Horizontal 105°
• Vertical 105
• Calculated Axial Output Limit (whole space SPL)
• Average: 122 dB (LF/HF)
• Peak: 128 dB (LF/HF)
• Input
• Type: Electronically balanced
• Max Input Level: 21dBu
• Impedance: 20 kOhm (balanced)
• Input Wiring: XLRF, Pin 1 chassis, pin 2 +, pin 3 – separate loop-thru XLRM (for analog signal only)
• Input Selection: Analog, Dante
• Amplifiers & Processing (LF/MF/HF)
• Type: Modified Class D (LF/HF)
• Maximum Output: 500W (LF/HF}
• Driver Protection: Integral DSP limiting  (LF/HF)
• AC Mains (nominal)
• Connector: Neutrik PowerCon®
• Input: 100 V to 240 V
• Frequency: 50 Hz to 60 Hz
• PowerConsumption
• Idle – 26W
• Peak Draw –175 W
• Controls/Communication
• Connections: 2x Neutrik® etherCON™, RJ-45
• Protocols: Ethernet/Dante
• Software: EAWmosaic™ (available on the App Store)
• Indicators: LCD Screen on amplifier panel for UI, Logo LED (User-definable behavior)
• User Controls: Push-button Rotary Encoder