Dynacord DC-PM600-3-MIG

Dynacord DC-PM600-3-MIG

Dynacord DC-PM600-3-MIG

Dynacord DC-PM600-3-MIG

Power Mixer, 4 Mic/Line + 4 Mic/Stereo Line Channels, 3xAux, Dual 24 bit Stereo Effects, USB Audio Interface, Power Amplifier 2x 1000W; incl Lid;

SKU: DYN-F.01U.263.562
MSRP: $3,259.00

Overview

The PowerMate compact power mixers incorporate profound know-how, based on our research, development and inter-communication with our customers in the professional audio market, for decades.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with maximum feature set at minimum size.

The mixing section starts with 6 lowest noise, discrete microphone preamps. 3 auxiliary busses, one of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories.

The built in USB audio interface shares 4 playback and 4 recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.

The 9 band stereo graphic equalizer allows precise tone control for speakers and room matching.

The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long-term power without giving up dynamics.

Finally, the slim housing is protected by a rugged plastic lid, hold by strong snap in magnets.

Features

  • Mixer with 8 input channels (4 Mic/Line + 2 Mic/Stereo-USB + 2 Stereo-Line)
  • Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
  • 2 High-Quality editable effects, 100 factory and 20 user presets
  • Professional 4x4 24-bit / 96 kHz USB interface with MIDI
  • Lightweight (9.5 kg) road-ready package with extra robust cover-lid

Specifications

Channels (Mono + Stereo)

4 + 4

Microphone Inputs (XLR)

6

Auxiliarys (MON, FX, AUX)

1 Pre, 1 Post, 1 Pre/Post switchable

Max. Single Channel Output Power, Dynamic-Headroom, IHF-A

into 2.66 Ω

2 x 1600 W

into 4 Ω

2 x 1250 W

into 8 Ω

2 x 675 W

Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%

into 2.66 Ω

2 x 1350 W

into 4 Ω

2 x 1150 W

into 8 Ω

2 x 650 W

Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel

into 2.66 Ω

2 x 1350 W

into 4 Ω

2 x 1000 W

into 8 Ω

2 x 600 W

Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel

into 4 Ω

2 x 900 W

into 8 Ω

2 x 450 W

Maximum Output Voltage, of power amplifier, 1 kHz, no load

74 Vrms

THD, at 1 kHz, MBW = 80 kHz

MIC input to Master A L/R outputs, +16 dBu, typical

< 0.005%

POWER AMP INPUTS to Speaker L/R outputs

< 0.075%

DIM 30, power amplifier, 3.15 kHz, 15 kHz

< 0.05%

IMD-SMPTE, power amplifier, 60 Hz, 7 kHz

< 0.15%

Frequency Response, -3 dB, ref. 1 kHz

Any input to any Mixer output

15 Hz to 70 kHz

Any input to Speaker L/R output

20 Hz to 30 kHz

Crosstalk, 1 kHz

Amplifier L/R

< -85 dB

Channel to Channel

< -80 dB

Mute- & Standby-Switch attenuation

> 100 dB

Fader & FX/AUX/MON-Send attenuation

> 85 dB

CMRR, MIC input, 1 kHz

> 80 dB

Input Sensitivity, all level controls in max. position

MIC

-74 dBu (155 µV)

LINE (Mono)

-54 dBu (1.55 mV)

LINE (Stereo)

-34 dBu (15.5 mV)

CD (Stereo)

-34 dBu (15.5 mV)

POWER AMP INPUTS

+8 dBu (1.95 V)

Maximum Level, mixing desk

MIC inputs

+11 dBu

Mono Line inputs

+31 dBu

Stereo Line inputs

+31 dBu

All other inputs

+22 dBu

All other outputs

+22 dBu

Input Impedances

MIC

2

CD In

10

All other inputs

> 15

Output Impedances

Phones

47 Ω

All other outputs (balanced/unbalanced)

150 Ω / 75 Ω

Equivalent Input Noise, MIC input, A-weighted, 150 ohms

-130 dBu

Noise, Channel inputs to Master A L/R outputs, A-weighted

 

Master fader down

-100 dBu

Master fader 0 dB, Channel fader down

-92 dBu

Master fader 0 dB, Channel fader 0 dB, Channel gain unity

-82 dBu

Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω

105 dB

Output Stage Topology, amplifier

Class D

Equalization

LO Shelving

±15 dB / 60 Hz

MID Peaking

±12 dB / 2.4 kHz

HI Shelving

±15 dB / 12 kHz

Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz)

±10 dB / Q = 1.5 to 2.5

Filter

LO-CUT, mono inputs

f = 80 Hz, 18 dB/oct., switchable

Speaker Processing

LPN, switchable

Effects

 

Type

2 x Stereo 24/48-bit multi effects processors

Effects presets

100 Factory + 20 User, Tap-Delay

Remote control

Footswitch, MIDI

Display

128 x 64 pixels, OLED

Digital Audio Interface

Channels

4 In / 4 Out

AD/DA Conversion

24-bit

Sampling Rate

44.1 / 48 / 88.2 / 96 kHz

PC Interface

USB2.0, Female Type B

Peak Display

6 dB before Clip

MIDI Interface

5-pin DIN connector, In / Out

Output Power Control (Speaker Protection)

Adjustable longterm RMS Limiter

Protection

Mixer Outputs, relay controlled

AUX, MON, MASTER A L/R

Amplifier

Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF

Switching Mode Power Supply (µC controlled)

Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature

Cooling

Continuous speed controlled Fans

Phantom Power, switchable

48 V DC

Power Requirements (SMPS with auto range mains input)

100 V to 240 V AC, 50 Hz to 60 Hz

Power Consumption, at 1/8 maximum output power, 4 Ω

450 W

Safety Class

I

Ambient Temperature Limits

+5 °C to +40 °C (40 °F to 105 °F)

Dimensions (W x H x D), mm

With lid: 438.8 x 161.7 x 362.5 Rack-mount: 483 x 135.8 x 310.3 (7 HU)

Weight

Net Weight, without lid

9.0 kg

Net Weight, with lid

9.5 kg

Shipping Weight

12 kg

Warranty

36 months

Optional Accessories

 

Rack Mount Kit

F01U214880 (DC-RMK-600-3)

FS 11 (Footswitch with LED)

F01U100598 (DC-FS11)

Carrying bag

F01U259014 (DC-BAG-600PM)