Overview
This handheld mic has an adapter that fits Sennheiser 2000/6000/9000/evolution/D1 wireless systems.
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
- Uniform supercardioid directionality
- Extreme SPL handling
Specifications
- Directional Pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency response: 20 Hz - 20 kHz
- Dynamic range: Typ. 117 dB
- Effective frequency range ±2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
- Max. SPL, THD 10%: 160 dB SPL peak
- Rated output impedance: 150 Ω
- Minimum load impedance: 1 kΩ
- Cable drive capability: 100 m (328 ft)
- Output balance principle: Impedance balancing with Active Drive
- Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
- Power supply (for full performance): P48 (Phantom Power)
- Current consumption: Max 2.5 mA
- Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
- Polarity: +V at pin 2 for positive sound pressure
Weight: 286 g (10.1 oz) - Microphone diameter: 48 mm (1.9 in)
- Capsule diameter: 19 mm (0.75 in)
- Microphone length: 188 mm (7.4 in)
- Temperature range: -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH): Up to 90%
