DAS INTEGRAL-A1604

DAS INTEGRAL-A1604

DAS INTEGRAL-A1604

DAS INTEGRAL-A1604

4-channel 400W @ 4 OHM OR 2-channel 800W @ 100V, 2U

SKU: DAS-INTEGRAL-A1604
MSRP: $2,837.85

Overview

INTEGRAL-A1604 is a quad channel, 2U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.

The amplifier delivers 4x400W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x800W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.

The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.

Features

  • 4 channel amplifier, Class D
  • 4 independent inputs
  • 400 W per channel @ 4 ohms
  • Low Z and High Z (Bridged 70 V/100 V) operation
  • Hybrid configuration operation (Hi Z and Low Z)
  • Universal Power Supply
  • 12dB/oct 80Hz HPF filter Selector (on/off)
  • Automatic Stand-by mode

Applications

  • Retail Stores
  • Bars, clubs and restaurants
  • Fitness Centers, hotels, schools

Specifications

Output Power Ratings
Power 8 Ohms, Both Channels Driven 4 x 200 W
Power 8 Ohms Bridged 2 x 800 W
Power 4 Ohms, Both Channels Driven 4 x 400 W
Power 100 V 2 x 800 W
Power 70 V 2 x 800 W
Electronics and Connectors
Amplifier Channels 4
Output Circuitry Class D
Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB)
Sensitivity 1.38 V (+5 dBu)
Voltage gain 32.5 dB
Damping Factor >350, each channel (8 Ω load, 1 kHz and below)
Controls Power On/Off, Gain Pots
Cooling Side-Right-to-Left
Amplifier Protections Short Circuit, DC Output, Temperature, Over/Under Voltage
LED Indicators On-Protect-Standby, Signal-Clip
Audio Signal Input Connector Terminal Block
Speaker Output Connector Terminal Block
Current Draw 230 V / 115 V 3.0 A / 6.0 A
Dimensions-Weight
Dimensions ( H x W x D ) 88 x 483 x 208 mm
3,5 x 19,0 x 8,2 in
Net Weight 3,8 kg ( 8,2 lb )
Shipping
Carton Dimensions ( H x W x D ) 170 x 525 x 315 mm
6,7 x 20,7 x 12,4 in
Shipping Weight 4,5 kg ( 9,9 lb )