Overview
This amplifier includes over-designed, high-capacity power supplies, which ensure that full power specification can be delivered into 2 ohms with all channels driven while still remaining highly efficient.
Features include:
- Eight channels of sonically pure Class D amplification
- Four analog inputs
- Unique, precise, 96kHz digital signal processing
- Over‐designed switch mode power supply 85V to 240V Auto-sensing PSU
- 10,000 watts RMS total output
- Full front panel user interface
- Ethernet network for system operation and monitoring
- Analogue, AES3 and optional DanteTM digital network audio
- Powerful grouping & multi‐layer EQ
- Manufactured in the UK
Specifications
- 2 Ohms: 1250W
- 4 Ohms: 1250W
- 8 Ohms: 1250W
- 4 or 8 Ohms Bridged: 2500W
- 25V line operation: 625W
- 25V line operation: 625W
- 70V line operation: 1250W
- 100V line operation: 1250W
- Switch mode power supply: 85V to 240V Auto-sensing
- Mains inrush current (max for <10ms): 6A at 115V and 12A at 230V
- Connector Type: L6-20
- Physical inputs to DSP drive modules: 4x analog, 2x AES & 4x DanteTM inputs can be routed to four DSP drive modules
- Drive module input processing: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2x low shelf, 6x PEQ / band pass and FIR shelving filters
- Drive module output processing: Source, delay, gain, Phase, Mute, crossover filters, VX limiters EQ: low shelf, 8x PEQ / band pass and shelving filters
- Preset management: 10 snapshots for device wide setup, 50 presets for loudspeaker settings Presets can be recalled to sets of outputs or individual outputs as required
- Overlays: Twelve additional independent overlays of EQ, Delay and Gain Flexible grouping for effective control of many amplifier channels in large systems
- Hardman crossover filters: Better out of band rejection than Linkwitz-Riley
- Hardman crossover filters: Unique Linear Phase alignments without the compromises of FIR filters
