Overview

The Danley DSA series is a collection of multi-purpose installation amplifiers. The DSA 125X4 is a four channel wifi enabled DSP amplifier. The amplifier has a built in Wireless Access Point (WAP) for simple connection and configuration via WiFi.

The DSA 125X4 features a full matrix digital signal processor (DSP) embedded and controlled via TCP/IP and an optimal hybrid of low and high Z performance.

Specifications

• Channels: 4 x Lo-Z / 2x Hi-Z
• Output power @ 4 Ohms / 8 Ohms / 70V / 100V* All Channels Driven: 125W Lo-Z / 250W Hi-Z
• Output power @ 4 Ohms / 8 Ohms / 70V / 100V* Single Channel Driven: 125W
• Output power @ 16 Ohms All Channels Driven: 125W
• Power Consumption: 150W
• Weight: 6.2 lbs | 2.8 kg
• Dimensions: 1.75″ x 8.66″ x 11.65″ | 44.5 x 220 x 296 mm
• Output Circuitry: UMAC(TM) Class D – full bandwidth PWM modulator with ultra-low distortion
• Output Voltage: 70Vp / 140 Vpp (unloaded) // Bridged 140Vp / 280 Vp (unloaded)
• THD+N (typical): < 0.05% (+0/-0.25dB (8 Ohm load, 3dB below rated power)
• Frequency Response: 20Hz – 20kHz (+0/-0.25dB (8 Ohm load, 3dB below rated power)
• Protection Circuits: Short circuit-, DC-, Undervoltage-, Temperature- and Overload protection
• Operating Temperature: 0-40C
• Accessories: Rack Mount Kit / Wall/Desktop Mount Kit, 1x IEC to NEMA 5-15
• Power Ratings: 1% THD @ 120Vac and 230Vac