Overview
Fast DMX Response
With usage of multiple LED fixtures and video mapping, many occasions require thousands of DMX channels. It's important to have fast DMX response and proper network load management. AutoBahn™ 8 not only provides instant response, but also a lower network load. It can allow you to increase the number of DMX universes and easily place DMX universes remotely on any TCP/IP Ethernet network. It can also be used as a DMX merger, DMX splitter, or backup device.
Fine Features
It features 1x RJ45 Neutrik™ EtherCON® 10/100M Ethernet LAN port with auto MDI/MDI-X (universal cable recognition), which eliminates the need of separate MDI and MDI-X ports, selector switches, or special crossover cables. It also has 2 DMX inputs which can be set as "input" or "disabled" status. You can assign each input to a specific "Universe" within the range of 0.0 - F.F. When the DMX port is set as "input", the port mode can be set as "normal" or "backup".
Features
- ArtNet/DMX bilateral signal conversion
- DMX outputs can be set to single, zero, HTP, or LTP
- Supports standard DMX-512 and ArtNet protocol
Specifications
Overview
ArtNet/DMX bilateral signal conversion
Supports standard DMX-512 and ArtNet protocol
DMX in/outs can be enabled or disabled
DMX outputs can be single, zero, HTP, or LTP
DMX inputs can be normal or backup mode
DMX splitter/merger functionality
Manual IP address settings
LCD display indicates each DMX input/output status
Ethernet LED status indicator
Connectors
1x RJ45 EtherCON® 10/100M Ethernet LAN port (auto MDI/MDI-X)
2x DMX inputs
8x DMX outputs
Warranty
2-year limited warranty
Dims & Weight
19" L x 6.1" W x 1.75" H
5.1 lbs
