Overview
The PowerZone™ Connect 1U series is a line of DSP-enabled Class-D amplifiers designed to make system installers’ lives easier, offering unparalleled reliability and efficiency, along with exceptional system configuration. The ultra-compact form factor, makes them an ideal choice for audio/voice installation projects with limited space constraints that demand high-output performance. The 1U family powers both conventional low-impedance (4Ω to 16Ω) loudspeakers and constant voltage (70V/ 100V) transformer-coupled loudspeakers, and features automatic power-sharing technology for proportional distribution in both Lo-Z and Hi-Z modes. The PowerZone™ Connect 1U amplifiers are optionally compatible with Audinate Dante™ AoIP networks and installations. Our intuitive PowerZone™ Control web app is built into all our PowerZone™ Connect amplifiers for easy system setup. PowerZone™ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multi-zone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.Ultra-compact form factor means it can be installed in spaces where others cannot.
Features
- Ultra-compact ½-rack form factor
- Full-matrix DSP configuration via PowerZoneâ„¢ Control web app (built-in)
- Hybrid power distribution in both Lo-Z and Hi-Z
- Powered by Pascal UMACâ„¢ Class-D technology
- Flexible power sharing across output channels
- Audinate Danteâ„¢ AoIP compatibility (optional)
- S/PDIF input/output
- Configurable GPIO
- ErP and Energy Star compliant / UL listed audio equipment
Specifications
- Channels: 4 x lo-Z / 2 x Hi-Z
- Output Power @ 4Ω: 4 x 60 W
- Output Power @ 8Ω: 4 x 60 W
- Output Power @ 70V: 2 x 125 W
- Output Power @ 100V: 2 x 125 W
- Powersharing (up to) across all channels: 1 x 250 W
- Power Consumption: 75 W
- Dimensions
- 44 x 220 x 319 mm
- (1.7 x 8.7 x 12.6 in)
- Weight: 2.8kg (6.2 lbs)
- Total System Power: 250 W
- Output Circuitry : UMACâ„¢ Class D - full bandwidth PWM modulator with ultra-low distortion
- Output Voltage : 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
- Signal To Noise-Ratio : > 106dB (A-weighted, 20Hz-20kHz, 8Ω load)
- THD+N (typical) : < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
- Frequency Response : 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
- Protection Circuits : Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
- Power Supply : URECâ„¢ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
- Operating temperature : 0-40°C
- Operating Voltage/ Frequency. : Universal Mains, 100V-240V, 50Hz-60Hz
- Standby Consumption : < 0.5W
- Options : Audinate Dante® AoIP compatibility (PowerZone™ Connect 122D/504D only)
- Power Ratings : Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz
