Overview
PowerZoneâ„¢ Connect 2U series
The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000W to 3000W. The PowerZone™ Connect 2U series powers both conventional low-impedance (2Ω to 16Ω) loudspeakers and constant voltage (70V/100V) transformer-coupled loudspeakers, and features proportional distribution in both Lo-Z and Hi-Z modes. The PowerZone™ Connect 2U amplifiers are optionally compatible with Audinate Dante™ AoIP networks and installations.
Our intuitive PowerZoneâ„¢ Control web app is built into all our PowerZoneâ„¢ Connect amplifiers for easy system setup. PowerZoneâ„¢ Control facilitates effortless customization of even the most challenging audio/voice systems by delivering many DSP configuration options and tuning features, including multi-zone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, Sine generator, and much more.
Features
- Full rack form factor
- Full-matrix DSP configuration via PowerZoneâ„¢ Control web app (built-in)
- Hybrid power distribution in both Lo-Z and Hi-Z
- Powered by Pascal UMACâ„¢ Class-D technology
- Audinate Danteâ„¢ AoIP compatibility (optional)
- S/PDIF input/output
- Configurable GPIO
- ErP and Energy Star compliant / UL listed audio equipment
Specifications
- Model: PowerZoneâ„¢ Connect 2004/2004D
- Channels: 4 x lo-Z / 2 x Hi-Z
- Output Power @ 2Ω: 4 x 500 W (SE)
- Output Power @ 4Ω: 4 x 500 W (SE) 2 x 1000 W (BTL)
- Output Power @ 8Ω: 4 x 250 W (SE) 2 x 1000 W (BTL)
- Output Power @ 70V: 2 x 1000 W (BTL)
- Output Power @ 100V: 2 x 1000 W (BTL)
- Power Consumption: 700 W
- Dimensions: 88 x 440 x 332 mm (3.5 x 17.3 x 13.1 in)
- Weight: 7.4 kg
- Output Voltage: 65 Vp / 130 Vpp (SE unloaded) 130 Vp / 260 Vpp (BTL unloaded)
- Total System Power: 2000 W
- Output Circuitry: UMACâ„¢ Class D - full bandwidth PWM modulator with ultra-low distortion
- Signal To Noise-Ratio: > 106dB (A-weighted, 20Hz-20kHz, 8Ω load)
- THD+N (typical): < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
- Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
- Protection Circuits: Short circuit -, DC -, Undervoltage -, Temperature - and Overload protection
- Power Supply: URECâ„¢ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
- Operating temperature: 0-40°C
- Operating Voltage/ Frequency.: Universal Mains, 100V-240V, 50Hz-60Hz
- Standby Consumption: < 0.5W
- Options: Audinate Dante® AoIP compatibility (PowerZone™ Connect 2004D/3004D only)
- Power Ratings: Output power measured @ 1% THD at 120VAC 60Hz and 230VAC 50Hz
