Overview
The CTT-1 Clamp-On Tactile Transducer has a universal mount that makes connecting a tactile transducer to the stem of most drum thrones or stools easy. At the heart of the CTT-1 is a premium ButtKicker® transducer, and an integrated locking speaker cable ensures a solid connection to the BOOM-1 processor.
New to Tactile Transducers?
A tactile transducer is similar in concept to a speaker (without the paper cone) and is designed to be most effective reproducing low frequencies like those produced in music by bass instruments and drums (typically 200Hz and below).
They are also quite effective when used for games and with sound effects for movies. But since a tactile transducer is designed without a speaker diaphragm, it can be used to allow you to feel low frequency vibrations while making very little audible sound.
That makes a tactile transducer a great addition to a personal mixing system when performers are using in-ear monitors. The frequency spectrum is more complete, and you'll be able to monitor at lower volumes while retaining all the fullness and excitement of performing at higher volumes.
Specifications
| Transducer Input | Attached, 2-conductor cable with locking connector |
|---|---|
| Dimensions | 6.125 x 4.375 x 4.375", 15.56 x 12.38 x 11.11 cm |
| Clamp Dimensions | Fits on posts up to 2.75" (69mm) in diameter |
| Dimensions, shipping | 10 x 8 x 10 inches, 25.4 x 20.32 x 25.4 cm |
| Weight | 7 lbs, 17.24 kg |
