Overview
The BOOM System
Now you can feel your monitor mix, too.
The BOOM System is designed to dramatically enhance a performer's personal mixing experience by adding powerful, optimally-processed low-frequency tactile information to any in-ear or headphone monitor mix.
Designed by the personal monitor experts, the BOOM System is easy to use and provides a natural low-frequency extension to your monitoring environment. The BOOM System products are compatible with all Aviom personal mixing systems and can easily be connected to any audio device that can provide a headphone or line-level output. In addition to the main unit, the BOOM-1 Tactile Transducer Processor, there's a BOOM System tactile transducer for every member of the band.
Tactile transducers are especially beneficial to performers using electronic drum kits, as well as guitar and bass amp simulators. Why? Because playing an acoustic drum kit or an electric guitar or bass through an amp actually vibrates the floor and this vibration becomes part of the live performance experience. When you switch to an electronic drum kit or a modeled amp system without speaker cabinets, those natural vibrations are eliminated.
Made for musicians using in-ears
In-ear monitors provide a detailed and personal monitoring experience. Adding a well processed low-frequency tactile transducer (also known as a 'bass shaker') to a drum throne, keyboard seat, guitarist's stool, performance platform, or even to the floor of a stage, allows the body to feel bass frequencies, adding realism to the mix. The BOOM-1 Tactile Transducer Processor brings Aviom-optimized DSP to the tactile experience.
Being able to hear and feel your mix can significantly improve the user experience when using in-ear monitors and/or headphones, providing powerful sound usually achieved only with high volume and large, high quality speaker cabinets.
A Great Combination
Using personal mixers and IEMs/headphones along with tactile transducers allows performers to achieve powerful, exciting monitor mixes at lower in-ear levels. This reduces sound-level-induced fatigue allowing longer, more enjoyable performances while also promoting long-term hearing health.
Specifications
Headphone In (front & rear) | 1/4-inch TRS stereo; Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
---|---|
Headphone Thru (front & rear) | 1/4-inch TRS stereo; Tip: Audio Left; Ring: Audio Right; Sleeve: Ground |
Line In | XLR female, Pin 2: Hot, Pin 3: Cold; Pin 1: Ground |
Maximum Input Level | 15.98 dBV |
Input Impedance | 9.5k Ohm |
Line Out | XLR balanced; mono; with Volume control |
Maximum Output Level | 12.55 dBV |
Output Impedance | 33.2 Ohms |
Amplifier Output | 4 Ohms - 210W 8 Ohms - 117W |
Transducer Output | 2-conductor locking speaker connector; |
Power Supply | Internal, universal switching type, IEC connector; 100-240 volts AC, 50/60Hz |
Fuse | 250VAC~ T3AL |
Dimensions | 19" (482.6 mm) wide x 8.62" (219.07 mm) deep; 2U, 3.5" (88.9 mm) high |
Weight | 6.0 lbs (2.72 kg) |