Overview

The satin-nickel M60N Low-Profile Boundary Microphone from Audix is a miniaturized, half-cardioid condenser microphone with fully integrated electronics and immunity from RF interference typically caused by cell phones and Global System for Mobile Communication (GSM) devices.

Specifications

• Connector: XLRm
• Transducer Type: Condenser
• Frequency Response: 70 Hz - 8 kHz
• Polar Pattern: Hemi Cardioid
• Output Impedance: 150 ohms
• Sensitivity: 68 mV / Pa @ 1k
• Equivalent Noise Level: 22 dB (A-weighted)
• Signal to Noise Ratio: 72 dB
• Maximum SPL: =130 dB
• Dynamic Range: 108 dB
• Power Requirements: 18-52 V phantom
• Connector: 3-pin XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Materials: Brass/ Black, Nickel Finish