Overview
The ES925ML/DS5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a MicroLine condenser microphone element, gooseneck and a desk stand power module.
The ES925ML/DS5 microphone’s low-profile element provides a uniform MicroLine polar pattern with a 90° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The desk stand power module features heavy die-cast construction and no-slip bottom pads to minimize coupling of surface vibration to the microphone. It is equipped with a touch-sensitive capacitive-type user switch with local and remote switching options. Locally, it can be set to any one of three operating modes: “touch-on/touch-off,” “touch-to-talk” and “touch-to-mute.” For enhanced control in conference and boardroom installations, the unit’s external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The desk stand is also equipped with a UniSteep® filter that provides steep low-frequency attenuation to improve sound pickup without affecting vocal reproduction quality. Both the desk stand and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.
Specifications
- Element: Fixed-charge back plate permanently polarized condenser
- Polar Pattern: Line + Gradient
- Frequency Response: 30 ~ 20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -35 dB (17.7mV) re 1V at 1 Pa
- Impedance: 130 Ω
- Maximum Input Sound Level: 137 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range (Typical): 114 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 71 dB, 1 kHz at 1Pa
