Overview
The ES925H21/FM3 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a hypercardioid condenser microphone element, gooseneck and a 3-pin flush-mount power module.
The ES925H21/FM3 microphone’s low-profile element provides a uniform hypercardioid polar pattern with a 100° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The 3-pin flush-mount power module is equipped with a capacitive touch switch that enables local muting of the microphone. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.
Features
- Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
- Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
- Capacitive touch switch enables local muting of the microphone
- Power module with 3-pin XLR output mounts unobtrusively in tabletops
- Designed for professional sound reinforcement and other commercial sound applications
- Interchangeable condenser microphone elements provide full-range, natural sound
- Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
- Included isolators provide mechanical dampening of mounting surface vibration
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Includes foam windscreen
- Available in six lengths
Specifications
|
Element
|
Fixed-charge back plate permanently polarized condenser
|
|
Polar Pattern
|
Hypercardioid
|
|
Frequency Response
|
30 ~ 20,000 Hz
|
|
Open Circuit Sensitivity
|
-40 dB (10.0 mV) re 1V at 1 Pa
|
|
Impedance
|
180 Ω
|
|
Maximum Input Sound Level
|
140 dB SPL, 1 kHz at 1% T.H.D.
|
|
Dynamic Range (Typical)
|
112 dB, 1 kHz at Max SPL
|
|
Signal-To-Noise Ratio
|
66 dB, 1 kHz at 1Pa
|
|
Switch
|
Mic On/Off;
LED color selector |
|
Phantom Power
|
22-52V DC, 8 mA
|
|
Weight
|
ES925H6/FM3: 110 g;
ES925H12/FM3: 134 g; ES925H15/FM3: 139 g; ES925H18/FM3: 144 g; ES925H21/FM3: 149 g; ES925H24/FM3: 154 g |
|
Dimensions
|
ES925H6/FM3: 207.6 mm (H) x 38 mm (W) x 48 mm (D);
ES925H12/FM3: 315.0 mm (H) x 38 mm (W) x 48 mm (D); ES925H15/FM3: 391.2 mm (H) x 38 mm (W) x 48 mm (D); ES925H18/FM3: 467.4 mm (H) x 38 mm (W) x 48 mm (D); ES925H21/FM3: 543.6 mm (H) x 38 mm (W) x 48 mm (D); ES925H24/FM3: 619.8 mm (H) x 38 mm (W) x 48 mm (D) |
|
Output Connector
|
3-Pin XLRM-type
|
|
Accessories Furnished
|
Isolator 1 pair; Nut;
Windscreen AT8109a; Set screw (M2×2 mm) 2 pcs.; Hex wrench (0.89 mm) |
