Overview

The ES925C21/FM3 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a condenser microphone element, gooseneck, and a 3-pin flush-mount power module.

Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (4.85", 9.08", 12.08", 15.08", 18.08", 21.08"), and microphone polar patterns (MicroLine®, hypercardioid, cardioid, omnidirectional).

The ES925C21/FM3 microphone’s low-profile element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The included foam windscreen protects against plosives. The 3-pin flush-mount power module is equipped with a capacitive touch switch that enables local muting of the microphone. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.

Each component is interchangeable with other ES925 modular microphone components, allowing you to customize your build.

Power Modules

• 3-pin XLR (XLR)
• 3-pin flush-mount (FM3)
• 5-pin flush-mount (FM5)
• 5-pin desk stand (DS5)

Gooseneck Lengths

• 4.85", 9.08", 12.08", 15.08", 18.08", 21.08”

Microphone Polar Patterns

• MicroLine®, (90° acceptance angle)
• Hypercardioid (100° acceptance angle)
• Cardioid (120° acceptance angle)
• Omnidirectional (120° acceptance angle) also available

Features

• Modular microphone system includes a microphone element, gooseneck and power module –each interchangeable with components from other ES Modular Microphones
• Element housing features a highly visible, single-state RGB LED status indicator that functions seamlessly with ATUC series products and AT8699R desk stand
• Power module plugs into any standard XLRF-type connector or mounts to 5/8"-27 stands using included quick-mount stand adapter
• Available interchangeable elements permit angle of acceptance from 90° to 360°
• Designed for professional sound reinforcement and other commercial sound applications
• Interchangeable condenser microphone elements provide full-range, natural sound
• Included low-profile universal isolation mount attenuates noise, shock and vibration
• Small-diameter gooseneck design permits highly flexible positioning
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Includes foam windscreen
• Available in six lengths

Specifications

Microphones

• Element: Fixed-charge back plate, permanently polarized condenser
• Frequency Response: 30-20,000 Hz
• Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 140 dB SPL
• Dynamic Range: 112 dB
• Signal-to-Noise Ratio: 66 dB
• Phantom Power Requirements: 22-52V DC
• Switches: LED Color x 2: mic on, mic off
• Current Consumption: 8 mA
• Weight: ES925C6/FM3: 110 g (3.9 oz) ES925C12/FM3: 134 g (4.7 oz) ES925C15/FM3: 139 g (4.9 oz) ES925C18/FM3: 144 g (5.1 oz) ES925C21/FM3: 149 g (5.3 oz) ES925C24/FM3: 154 g (5.4 oz)
• Dimensions: ES925C6/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 207.6 mm (8.17") H ES925C12/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 315.0 mm (12.40") H ES925C15/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 391.2 mm (15.40") H ES925C18/FM3: 38.0 mm (1.
• Output Connector: Integral 3-pin XLRM-type
• Optional Interchangeable Elements: ESE-Ca cardioid (120°), ESE-Ha hypercardioid (100°), ESE-MLa MicroLine® (90°), ESE-Oa omnidirectional (360°)
• Accessories Included: One pair of isolators; nut; AT8109a foam windscreen; set screw (M2 x 2); hex wrench
• Audio-Technica Case Style: M44