Audio Technica ATW-2192XCITH

Audio Technica ATW-2192XCITH

Audio Technica ATW-2192XCITH

Audio Technica ATW-2192XCITH

2000 SERIES BODYPACK W/BP892XCW-TH

SKU: AT-ATW-2192XCITH
MSRP: $629.00
MAP: $629.00

Overview


ATW-R2100c receiver and ATW-T210c body-pack transmitter with BP892xcW-TH MicroSet omnidirectional condenser headworn microphone (beige). Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.


Specifications


Overall System

  • Operating Frequencies: Band I : 487.125 to 506.500 MHz
  • Modulation Mode: FM
  • Maximum Deviation: ±40 kHz
  • Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
  • Operating Range: 100 m (300'), typical Open range environment with no interfering signals.
  • Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
  • Operating Temperature Range: 5º C to 45º C, 41º F to 113º F, Battery and LCD performance may be reduced at very low temperatures.
  • Number Of Channels: 10 total

Handheld Transmitter

  • RF Power Output: High: 30 mW; Low: 10 mW (switchable), at 50 ohms
  • Spurious Emissions: Following federal and national regulations
  • Microphone Element: Dynamic cardioid
  • Battery Type: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included), Recharging power for NiMH batteries (with ATW-CHG2), U.S./Canada/Latin America: 3.2 V DC, 230 mA x2, Other world areas: 3.2 V DC, 320 mA x2
  • Battery Life: High: 7 hours (alkaline), Low: 9 hours (alkaline), Depending on battery type and use pattern.
  • Dimensions: 232.0 mm (9.13") long, 48.0 mm (1.89") diameter
  • Net Weight: 252 g (8.9 oz), without batteries
  • Accessories Included: AT8456a Quiet-Flexâ„¢ stand clamp

Body Pack

  • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Battery Life: High: 7 hours (alkaline), Low: 9 hours (alkaline), Depending on battery type and use pattern.
  • Battery Type: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included), Recharging power for NiMH batteries (with ATW-CHG2)U.S./Canada/Latin America: 3.2 V DC, 230 mA x2Other world areas: 3.2 V DC, 320 mA x2
  • Dimensions: 66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
  • Input Connections: Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
  • Net Weight: 81 g (2.9 oz), without batteries
  • Spurious Emissions: Following federal and national regulations

Receiver

  • Receiving System: True diversity
  • Image Rejection: 60 dB nominal, 55 dB minimum
  • RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
  • Maximum Output Level: XLR, balanced: +9 dBV, ¼" (6.3 mm), unbalanced: +4 dBV
  • Antenna Input: BNC-type, 50 ohms, Bias voltage 12V DC, 60 mA, each
  • Power Requirements: 12-18V DC, 500 mA
  • Dimensions: 210.0 mm (8.27") W x162.2 mm (6.39") D x44.0 mm (1.73") H,br>Not including BNC connectors or feet.
  • Weight: 1.0 kg (35.3 oz), without accessories
  • Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
  • Audio Output Attenuator (ATTN): Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB