Overview:
The unD4O DanteTM interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dantebased networked audio system. The unD4O’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.
Features:
- Small form factor, can be unobtrusively located near analog input devices in systems with Dante audio infrastructure
- 4 balanced line-level analog outputs from up to 4 different Dante audio flows
- Maximum output level of +20dBu (+20dBu = 0dBFS in the digital domain)
- Power, Sys, Error, and Sync LEDs on the front panel for easy network troubleshooting
- PoE powered to work with any compliant 802.3af PoE network switch or mid-span injector, external +24VDC supply
Specifications:
| Output Type | Balanced line level with automatic muting on loss of Dante signal. |
| Output Gain | 0dB |
| Output Noise | <-80dBu (20-20kHz flat weighting) |
| Maximum Output Level | +20dBu (+20dBu = 0dBFS in the digital domain) |
| System THD | <.01% at an output level 3dB below maximum |
| DC Input Power | +24VDC@250mA |
| PoE Class | Class 0 802.3af PoE PD compliant |
| Certifications | FCC Part 15 Class A, CE (EN 55022 Class A) |
| Dimensions | 6.45” W x 1.06” H x 3.45” D |
| Operating Temperature | 0o C - 40o C |
