Overview
The Atlas Learn AL-EAGLE infrared receiver is a two channel infrared receiver that is designed to work with Atlas Learn infrared infrared microphones, AL-MAGPIE and AL-MYNA. The AL-EAGLE connects via RCA output to almost any local audio amplifier. This allows teachers and students to walk freely around the classroom with the infrared microphones/system control units and project their voices through connected, installed speakers.
The AL-EAGLE also features a contact closure output that can be connected to a secondary system allowing the teacher to signal an emergency situation in the classroom using the "Panic" feature on the AL-MAGPIE or AL-MYNA wireless transmitters (in "teacher" mode only). For larger rooms, the AL-EAGLE has an F-pin style input connector that is designed to be used with a secondary infrared wireless dome, AL-IRDS, if needed. Volume controls for the two wireless transmitters are located on the side of the AL-EAGLE to properly set or adjust transmitter volume internally mixing the two channels for output to the amplifier . Three LEDs are located on the front of the unit and act as visual indicators for system power and connection.
Features
- Works in Conjunction with Secondary Systems to Provide Enhanced Classroom Security
- Easily Integrates into Any Existing Classroom Sound Reinforcement System
- Works with Both AL-MYNA and AL-MAGPIE Wireless Infrared Transmitters
- Supports 2 Separate Transmitters with Independent Level/Mix Controls
- Remote Antenna Input Allows for Connection of Second AL-IRDS Infrared Dome Sensor
Specifications
Line Output Connector | RCA |
IR Frequencies | 2.35mHz - 2.8mHz |
Line Output Voltage | 1.3V |
PSU Type | 100V-240V In, 18VDC/1A Out |
IR Input Impedance | 75Ω |
IR Input Connection Type | F-Pin Connector |
Indicator LEDs | Power, RF A, RF B |
Height | 7.75" (19.69cm) |
Width | 3.33" (8.46cm) |
Depth | 2.50" (6.35kg) |
Weight | 0.5 lbs. (0.23kg) |
Warranty Period | 12 months from date of purchase |