Overview
The IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio. The IED1522AIOLR is perfect for applications requiring additional inputs or outputs to an existing CobraNet system.
Features
-
Inputs
-
Two balanced analog microphone/line inputs
-
Software adjustable, non-volatile, input levels from –50 to +24dBu
-
-90dB THD+ N
-
Software selectable 48V phantom power individually available on all inputs
-
Outputs
-
Two balanced analog line outputs
-
Software adjustable, non-volatile output levels from -10 tp +24dBu
-
GPIO
-
Four opto-isolated inputs
-
four normally open relay isolated outputs
-
CobraNet
-
Redundant CobraNet
-
Separate CobraNet channels of CobraNet channels used for in and out
-
DSP
-
Programmable delay up to 10 seconds on each audio output
-
5 band parametric equalizer bands (high-pass, low-pass, peaking, notch)
-
Compander/Limiter on each input
-
Level Control
-
Power
-
Power over Ethernet (PoE) 802.3af complianton primary Ethernet connection
Specifications
COBRANET INPUT/OUTPUT | |
Type | 100BaseT Ethernet |
Connector Type | RJ-45 |
Sample Rate | 48kHz |
Latency | 1.33, 2.66 or 5.33ms |
MICROPHONE/LINE INPUT | |
Type | Balanced |
Connector Type | Terminal block |
Input Level | -50 to +24dBu in 1dB increments |
Input impedance | 5kOhm balanced |
Sample Rate | 48kHz |
Frequency Response | 20Hz to 20kHz +/-3dB |
Analog Output | |
Type | Balanced |
Connector Type | Terminal Block |
Output Level | -10 to +24 dBu in 1dBu steps |
Load Impedance | -10 to +14dBu:600 Ohms or greater; 15dBu to +24dBu: 2kOhms or greater |
Dynamic Range | >100dB |
THD+N | < -88dB |
Sample Rate | 48kHz |
Frequency Response | 20Hz to 20kHz +/-3dB |
Warranty Period | 36 months from date of purchase |